Saltar al contenido principal

Partes

No se especificaron partes.

  1. Using the Phillips #0 in the bit driver, carefully loosen and remove the single  5mm screw. With the retaining screw removed, lift the panel upwards to separate it from the netbook.
    • Using the Phillips #0 in the bit driver, carefully loosen and remove the single 5mm screw.

    • With the retaining screw removed, lift the panel upwards to separate it from the netbook.

  2. To replace the panel, do step 1 in reverse: Align the panel slots in the appropriate grooves and set in place.
    • To replace the panel, do step 1 in reverse:

    • Align the panel slots in the appropriate grooves and set in place.

    • With the bit driver, replace the screw to secure the RAM panel.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Using the bit driver and the Phillips bit, remove both of the panel's retaining screws. With the screws removed, lift the panel in the designated direction, as depicted in photo, for removal.
    • Using the bit driver and the Phillips bit, remove both of the panel's retaining screws.

    • With the screws removed, lift the panel in the designated direction, as depicted in photo, for removal.

    • The hard drive is located beneath this cover and is now accessible.

  5. To replace the hard drive panel, do step 3 in reverse: Place the panel back in its original position and press down.
    • To replace the hard drive panel, do step 3 in reverse:

    • Place the panel back in its original position and press down.

    • If the hard drive was removed or replaced during this process, improper installation may prevent the hard drive panel from sitting in the slots properly.

    • With the bit driver and Phillips bit, replace the two retaining screws to secure the cover plate in place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

Miembro Desde 18/10/13

964 Reputación

9 Guías creadas

Equipo

Clemson, Team 14-2, Benson Fall 2013 Miembro de Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 7

Todo El Tiempo: 637