Saltar al contenido principal

Partes

No se especificaron partes.

  1. Remove the 4 mm Hex screw securing the back of the seat.
    • Remove the 4 mm Hex screw securing the back of the seat.

  2. Remove the two 10 mm hex head bolts, one on either side of the seat. Remove the two 10 mm hex head bolts, one on either side of the seat.
    • Remove the two 10 mm hex head bolts, one on either side of the seat.

  3. Push the seat towards the front of the bike and lift it up.
    • Push the seat towards the front of the bike and lift it up.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

iFixit Miembro de iFixit

Community

108 Miembros

9,541 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 20

Todo El Tiempo: 2,156