Saltar al contenido principal

Disassembling Speak And Spell Case

Qué necesitas

  1. Disassembling Speak And Spell Case, Case: paso 1, imagen 1 de 2 Disassembling Speak And Spell Case, Case: paso 1, imagen 2 de 2
    • Flip the toy over, so that the keypad is facing away from you.

    • Remove two Phillips-head screws.

    • Insert a plastic spudger (or 4!) into the marked holes, and push down and towards the edge to release each catch.

    • It's possible to release each catch one-at-a-time, but easier if you have 4 tools and do them simultaneously.

    • This requires quite a bit of force; be careful.

  2. Disassembling Speak And Spell Case: paso 2, imagen 1 de 1
    • Separate the two halves of the case to expose the inner PCB, speaker and battery holder.

Conclusión

To reassemble your device, follow these instructions in reverse order.

bushing

Miembro Desde 04/23/10

10,244 Reputación

13 Guías creadas

Un comentario

I got one of these. I've opened the case and the battery connections are silver and show no corrosion at all. I replaced the batteries, swapped out one of the Word Modules. I got a bit of static once, but now nothing. All the wire connection soldering looks fine. Any ideas?

stevehelium@gmail.com

Stephen Henderson - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 11

Todo El Tiempo: 4,947