Introducción

This a simple process requiring only a small Phillips screwdriver and a slim flathead.

Note: A few trays for the screws, a wristband and an anti-static surface mat are ideal for safe handling of sensitive electronics.

- Remove battery.
  • - Remove battery.

  • - Remove memory tray door (1 Screw).

  • - Remove hard drive door (1 Screw).

  • - Remove hard drive (3 Screws).

Agregar Comentario

- Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.
  • - Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.

Agregar Comentario

  • - Remove CD/DVD Drive by sliding it out.

  • - Remove three more screws, which were hiding under the DVD drive.

Agregar Comentario

  • - Carefully remove the cover, by unpopping it with a slim flathead, slide it out away from the RJ-45, HDMI and VGA ports.

Agregar Comentario

  • - The audio/usb interface card is now within reach. Just remove the two screws and carefully slide out the flat connector to remove the card.

Agregar Comentario

  • - Fire up the air compressor and blow out dust from the fan and heatsinks.

Agregar Comentario

  • - If you are replacing your RAM, simply unpop the four latches and slide out the memory sticks.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Artem Nikulkov

Miembro Desde 22/10/10

232 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 6

Todo El Tiempo: 20,395