Introducción

Removing the front cover is a necessary first step in disassembling the camera in order to repair or replace any internal parts.

Partes

No se requieren partes.

Locate the battery door at the bottom of the camera.
  • Locate the battery door at the bottom of the camera.

  • Press down on the door and slide it back. The door will pop open.

Agregar Comentario

Remove the battery from the door that you opened in the previous step.
  • Remove the battery from the door that you opened in the previous step.

Agregar Comentario

  • There are two screws on the left and right sides of the camera, and two screws on the bottom.

  • Use a PH00 screwdriver and remove the six 2.9mm screws.

Agregar Comentario

  • Use hands to gently pry the front casing away from the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

iDeleted

Miembro Desde 07/07/10

2,101 Reputación

41 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 2,244