Saltar al contenido principal

Disassembling Sanyo SCP-8100 Back Panel

Qué necesitas

  1. Disassembling Sanyo SCP-8100 Back Panel, Battery: paso 1, imagen 1 de 3 Disassembling Sanyo SCP-8100 Back Panel, Battery: paso 1, imagen 2 de 3 Disassembling Sanyo SCP-8100 Back Panel, Battery: paso 1, imagen 3 de 3
    • Push and hold the button on the back toward the direction of the arrow to unlock the battery.

    • Lift and remove the battery from the back of the phone.

  2. Disassembling Sanyo SCP-8100 Back Panel, Back Panel: paso 2, imagen 1 de 2 Disassembling Sanyo SCP-8100 Back Panel, Back Panel: paso 2, imagen 2 de 2
    • Using a push pin, pull out the plug on the back, located under the antenna.

    • You may try to use a spudger or opening tool, however, you may damage the plug because those tools are too thick.

  3. Disassembling Sanyo SCP-8100 Back Panel: paso 3, imagen 1 de 1
    • Unscrew the four 6mm long screws with a Tri-Wing Y1 screwdriver.

  4. Disassembling Sanyo SCP-8100 Back Panel: paso 4, imagen 1 de 2 Disassembling Sanyo SCP-8100 Back Panel: paso 4, imagen 2 de 2
    • Use a plastic opening tool to pry the back panel along the edges.

    • You may need to apply some force when prying.

  5. Disassembling Sanyo SCP-8100 Back Panel: paso 5, imagen 1 de 3 Disassembling Sanyo SCP-8100 Back Panel: paso 5, imagen 2 de 3 Disassembling Sanyo SCP-8100 Back Panel: paso 5, imagen 3 de 3
    • While removing the back panel, take out the rubber cover on each side.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Yemane

Miembro Desde 04/13/13

11 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 10-41, Amido Spring 2013 Miembro de Cal Poly, Team 10-41, Amido Spring 2013

CPSU-AMIDO-S13S10G41

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 10

Todo El Tiempo: 366