Introducción

How to remove the screen.

Push open the latch and remove the battery.
  • Push open the latch and remove the battery.

Agregar Comentario

Twist off the antenna.
  • Twist off the antenna.

  • Pop off the transparent cylinder.

Agregar Comentario

  • Remove the five screws as shown.

Agregar Comentario

  • Carefully pry the back plate off.

Agregar Comentario

  • Carefully detach golden screen connector.

Agregar Comentario

  • Pop out the logic board with spudger.

  • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

Agregar Comentario

  • Place the logic board on a clean tray.

Agregar Comentario

  • Remove the hinge on the phone.

    • Put pressure on the spring with the screwdriver to unhinge phone.

  • Make sure to pull the gold wire through, don't let it rip.

Agregar Comentario

  • Remove the four screws as shown

  • Use the spudger to pry it open, excessive force may be necessary.

Agregar Comentario

  • Remove the three screws that hold the big speaker

    • Caution: The wires are attached to the screen and should be removed with care.

Agregar Comentario

  • Remove the three screws as shown.

  • Pull off the metal bracket.

Agregar Comentario

  • Use the spudger to pop off the screen.

    • Pop off the Microphone/Speaker as well.

  • Place all of the components on a clean tray and clean environment.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

doconnor

Miembro Desde 19/04/10

25 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 10-43, Garner Spring 2010 Miembro de Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 Miembros

12 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 6

Todo El Tiempo: 1,770