Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

How to remove keyboard

  1. Push open the latch and remove the battery. Push open the latch and remove the battery.
    • Push open the latch and remove the battery.

  2. Twist off the antenna. Pop off the transparent cylinder.
    • Twist off the antenna.

    • Pop off the transparent cylinder.

  3. Remove the five screws as shown.
    • Remove the five screws as shown.

  4. Carefully pry the back plate off.
    • Carefully pry the back plate off.

  5. Carefully detach golden screen connector. Carefully detach golden screen connector.
    • Carefully detach golden screen connector.

  6. Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
    • Pop out the logic board with spudger.

    • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

  7. Place the logic board on a clean tray. Place the logic board on a clean tray.
    • Place the logic board on a clean tray.

  8. Peel off the keyboard.
    • Peel off the keyboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

David

Miembro Desde 19/04/10

25 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 10-43, Garner Spring 2010 Miembro de Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 Miembros

12 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,087