Introducción

This guide tells you how to remove the back or rear panel of the Samsung Epic 4G, which is an important first step in working with the internal parts of the phone.

Herramientas

Partes

No se requieren partes.

Turn off the phone using the "Power Button". The Power button is located on the left side of the phone and has a circle on it.
  • Turn off the phone using the "Power Button". The Power button is located on the left side of the phone and has a circle on it.

  • To remove the back panel of the phone, slide your fingernail along the edge of the device and pull at the panel as shown in the figure. While pulling at it along the edge you will hear a snap. That snap tells you that the panel is coming off the phone.

Agregar Comentario

After hearing the snap you should be able to remove the plastic backing by pulling at it gently.
  • After hearing the snap you should be able to remove the plastic backing by pulling at it gently.

Agregar Comentario

Linea de Meta

3 personas más completaron esta guía.

Equipo

Cal Poly, Team 24-25, Regan Fall 2012 Miembro de Cal Poly, Team 24-25, Regan Fall 2012

CPSU-REGAN-F12S24G25

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 732