Saltar al contenido principal

Disassembling RCA CC310 Left Cover

Qué necesitas

  1. Disassembling RCA CC310 Left Cover, Disassembling RCA CC310 Left Cover: paso 1, imagen 1 de 2 Disassembling RCA CC310 Left Cover, Disassembling RCA CC310 Left Cover: paso 1, imagen 2 de 2
    • Remove the six 7.9mm Phillips #0 screws on the back and bottom.

    • Remove the one 3.8mm Phillips #0 screw on the bottom.

    • Remove the two 7.5mm Phillips #0 screws on the back and bottom.

  2. Disassembling RCA CC310 Left Cover: paso 2, imagen 1 de 2 Disassembling RCA CC310 Left Cover: paso 2, imagen 2 de 2
    • Remove 5.8mm Phillips #1 screw from the side button panel.

    • Slide the viewfinder all the way to the right and remove the 7.9mm Phillips #0 screw.

  3. Disassembling RCA CC310 Left Cover: paso 3, imagen 1 de 2 Disassembling RCA CC310 Left Cover: paso 3, imagen 2 de 2
    • Pry along the seam on the top side near the buttons with a spudger.

  4. Disassembling RCA CC310 Left Cover: paso 4, imagen 1 de 2 Disassembling RCA CC310 Left Cover: paso 4, imagen 2 de 2
    • Pull the left panel away from the rest of the camcorder.

    • Unplug the red speaker cable located at the rear of the device.

    • Be careful to not pull too hard. The speaker cable is still connected to the panel and it can rip.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 5-20, Amido Winter 2011 Miembro de Cal Poly, Team 5-20, Amido Winter 2011

CPSU-AMIDO-W11S5G20

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 13

Todo El Tiempo: 958