Repara tus cosas Comunidad Tienda

Disassembling Qualcomm QCP-2760 Rear Backing

Introducción

Must remove battery first. Prerequisite to removal of antenna, motherboard and screen.

Qué necesitas

  1. Disassembling Qualcomm QCP-2760 Rear Backing, Battery: paso 1, imagen 1 de 1

    • Unscrew the back battery plate from the phone using a T6 Torx screwdriver.

    • The screw does not need to be removed completely, the back battery plate will unhinge from the phone.

    Traducir

  3. Disassembling Qualcomm QCP-2760 Rear Backing, Rear Backing: paso 2, imagen 1 de 2 Disassembling Qualcomm QCP-2760 Rear Backing, Rear Backing: paso 2, imagen 2 de 2

    • Using the T6 Torx screwdriver, remove the two screws located at the bottom of the back of the phone.

    • Find the seam between the front and back of the phone

    • Pry the seam open using a plastic opening tool, or your fingers.

    • Some force is required

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 8 otros colaboradores

Xavier

Miembro Desde 10/02/14

313 Reputación

3 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Ohio State, Team 1-4, Buehl Fall 2014 Miembro de Ohio State, Team 1-4, Buehl Fall 2014

OSU-BUEHL-F14S1G4

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 9

Todo El Tiempo: 206