Repara tus cosas Comunidad Tienda

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide)

Introducción

After many requests, here is a video tutorial showing how to disassembly a PlayStation Vita's Screen & Digitizer from its front plastic frame assembly.

Qué necesitas

Resumen del Video

  1. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Case Separation: paso 1, imagen 1 de 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Case Separation: paso 1, imagen 2 de 2

    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    Editar

  2. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 2, imagen 1 de 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 2, imagen 2 de 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 2, imagen 3 de 3

    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    Editar

  3. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 3, imagen 1 de 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 3, imagen 2 de 2

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    Editar

  4. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 4, imagen 1 de 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 4, imagen 2 de 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 4, imagen 3 de 3

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    Editar

  6. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 5, imagen 1 de 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 5, imagen 2 de 2

    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    Editar

  7. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 6, imagen 1 de 1

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    Editar

  8. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 7, imagen 1 de 1

    • Free the battery cable by gently prying up on the connection with a spudger.

    Editar

  9. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 8, imagen 1 de 1

    • Separate the front and rear cases.

    Editar

  10. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Battery: paso 9, imagen 1 de 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Battery: paso 9, imagen 2 de 2

    • With the help of a spudger, gently pry off and remove the battery cable retainer on the back casing assembly.

    • The easiest access to the battery cable retainer is where the battery cable comes out.

    • You can also use the two small tabs on the side of the cable retainer. Locate the tabs and release one at a time. Be a little careful not to push the cover in and re-lock it.

    Editar

  11. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 10, imagen 1 de 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 10, imagen 2 de 2

    • Using a Phillips #00 screwdriver, remove the two 5.0mm blue battery case screws.

    • Remove the plastic battery retaining bar.

    Editar

  12. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 11, imagen 1 de 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 11, imagen 2 de 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): paso 11, imagen 3 de 3

    • Using your finger or a spudger, lift the battery out and remove it.

    • Guide the battery wires through the hole in the back casing as you remove the battery.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Autor

con 1 otro colaborador

djgodmandj

Miembro Desde 10/24/14

284 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 11

Ultimos 30 días: 32

Todo El Tiempo: 5,678