Saltar al contenido principal

Disassembling Panasonic GU87 LCD Main Board

Qué necesitas

  1. Disassembling Panasonic GU87 LCD Main Board, LCD Cover removal: paso 1, imagen 1 de 1
    • Remove the four rubber screw covers from encircled locations.

    • Using a #0 tri wing screwdriver, remove the screws previously hidden below the rubber covers.

    • If you have difficulties finding this screwdriver, it is commonly sold as a Nintendo Gameboy/Wii screwdriver.

  2. Disassembling Panasonic GU87 LCD Main Board: paso 2, imagen 1 de 1
    • Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.

    • Be mindful of location and magnitude of applied force, so as not to damage the case.

  3. Disassembling Panasonic GU87 LCD Main Board, LCD: paso 3, imagen 1 de 1
    • Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.

  4. Disassembling Panasonic GU87 LCD Main Board: paso 4, imagen 1 de 1
    • Use fingernails to pry off minor LCD mount, as shown.

    • Remove the minor LCD

  5. Disassembling Panasonic GU87 LCD Main Board, Main Board: paso 5, imagen 1 de 1
    • Unlock the LCD connectors shown in red boxes on the picture .

    • Use tweezers as necessary.

  6. Disassembling Panasonic GU87 LCD Main Board: paso 6, imagen 1 de 1
    • Place finger nails on the connector tab as shown.

    • Lift the connector tab up.

  7. Disassembling Panasonic GU87 LCD Main Board: paso 7, imagen 1 de 1
    • Pull/pivot the LCD main board as shown in order to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Van

Miembro Desde 06/24/10

7 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 2-10, Johann Summer 2010 Miembro de Cal Poly, Team 2-10, Johann Summer 2010

CPSU-JOHANN-R10S2G10

4 Miembros

20 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 1,800