Introducción

Use this guide to separate the face plate from the amplifier.

Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.
  • Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.

Agregar Comentario

Remove the top screw on the back panel.
  • Remove the top screw on the back panel.

Agregar Comentario

  • Slide off the case to expose the internal components of the receiver.

Agregar Comentario

  • Unscrew the three screws on top of the face plate.

Agregar Comentario

  • Unscrew the one screw on the bottom of the front panel.

Agregar Comentario

  • Simultaneously push down on the head of the snap on each end of the device with your thumbs and push to seperate the face plate. This may take some force.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ryan

Miembro Desde 13/04/10

86 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 27-92, Amido Spring 2010 Miembro de Cal Poly, Team 27-92, Amido Spring 2010

CPSU-AMIDO-S10S27G92

4 Miembros

7 Guías creadas

I would like to remove Front Face plate of my Onkyo TX-SR875 AV Receiver. Please guide me how can I open it?

Ashish Solanki - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 15

Todo El Tiempo: 2,273