Repara tus cosas Comunidad Tienda

Olympus Stylus 725 SW LCD Screen Replacement

Introducción

This guide provides instructions for replacing a broken LCD screen on the Olympus Stylus 725.

Qué necesitas

  1. Olympus Stylus 725 SW LCD Screen Replacement, Disassembling Olympus Stylus 725 SW Battery: paso 1, imagen 1 de 2 Olympus Stylus 725 SW LCD Screen Replacement, Disassembling Olympus Stylus 725 SW Battery: paso 1, imagen 2 de 2

    • The battery is located on the bottom of the camera.

    • Remove the battery by placing your thumb on the bottom flap and sliding the release button away from the side the lens is on. (The screwdriver is simply used as a reference point, no screws need to be removed)

    • If the battery is dead, charge it for 60-90 minutes.

    • When installing a charged battery, align the battery appropriately. The positive signs and negative should line up.

    Editar

  2. Olympus Stylus 725 SW LCD Screen Replacement, Disassembling Olympus Stylus 725 SW Back Panel: paso 2, imagen 1 de 3 Olympus Stylus 725 SW LCD Screen Replacement, Disassembling Olympus Stylus 725 SW Back Panel: paso 2, imagen 2 de 3 Olympus Stylus 725 SW LCD Screen Replacement, Disassembling Olympus Stylus 725 SW Back Panel: paso 2, imagen 3 de 3

    • Remove the four 3 mm long cover screws at the corners of the camera using a Phillips #00 screwdriver.

    • Remove the 2 mm long screws securing the sides of the camera which holds the back panel using a Phillips #00 screwdriver.

    Editar

  4. Olympus Stylus 725 SW LCD Screen Replacement: paso 3, imagen 1 de 2 Olympus Stylus 725 SW LCD Screen Replacement: paso 3, imagen 2 de 2

    • Be careful when removing the back cover; you will need to detach the connecting ribbons. Use tweezers if necessary.

    • Detach the ribbons using your thumb, sliding them out of their slots.

    • Set the back panel face up to keep the ribbons from touching anything.

    Editar

  5. Olympus Stylus 725 SW LCD Screen Replacement, LCD Screen: paso 4, imagen 1 de 3 Olympus Stylus 725 SW LCD Screen Replacement, LCD Screen: paso 4, imagen 2 de 3 Olympus Stylus 725 SW LCD Screen Replacement, LCD Screen: paso 4, imagen 3 de 3

    • Remove the screws in the back panel using a Phillips #00 screwdriver.

    • Detach the ribbon cables that connect the LCD to the back panel of the camera.

    Editar

  6. Olympus Stylus 725 SW LCD Screen Replacement: paso 5, imagen 1 de 2 Olympus Stylus 725 SW LCD Screen Replacement: paso 5, imagen 2 de 2

    • Use tweezers to remove the loosened LCD screen.

    • Be careful to not scratch the new LCD screen when replacing it.

    • Carefully place the new screen in place of the old, making sure the label faces up.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 8 otros colaboradores

Bobby Hodges

Miembro Desde 04/18/10

49 Reputación

6 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team 33-71, Johann Spring 2010 Miembro de Cal Poly, Team 33-71, Johann Spring 2010

CPSU-JOHANN-S10S33G71

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 7,996