Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Disassembling Olympus Stylus 1010 Case

Qué necesitas

  1. Disassembling Olympus Stylus 1010 Case, Case: paso 1, imagen 1 de 2 Disassembling Olympus Stylus 1010 Case, Case: paso 1, imagen 2 de 2
    • Unscrew the bottom and right side panel screws using a #00 screwdriver. (5 screws)

  2. Disassembling Olympus Stylus 1010 Case: paso 2, imagen 1 de 1
    • Remove the right side panel by pulling off the large silver piece.

  3. Disassembling Olympus Stylus 1010 Case: paso 3, imagen 1 de 2 Disassembling Olympus Stylus 1010 Case: paso 3, imagen 2 de 2
    • Unscrew the remaining side and front panel screws using a #00 screwdriver. (3 screws)

  4. Disassembling Olympus Stylus 1010 Case: paso 4, imagen 1 de 1
    • Using your thumb and forefinger, pull off the silver name plate and silver "T-shape" piece. (2 pieces)

  5. Disassembling Olympus Stylus 1010 Case: paso 5, imagen 1 de 1
    • Remove the black front panel by sliding it towards the lens and then pulling it up off the camera.

  6. Disassembling Olympus Stylus 1010 Case: paso 6, imagen 1 de 3 Disassembling Olympus Stylus 1010 Case: paso 6, imagen 2 de 3 Disassembling Olympus Stylus 1010 Case: paso 6, imagen 3 de 3
    • Remove 3 screws from the front of the camera using a #00 screwdriver.

    • Lift the two tabs to separate the case using a spudger. (one tab on top and one tab on the right side)

  7. Disassembling Olympus Stylus 1010 Case: paso 7, imagen 1 de 3 Disassembling Olympus Stylus 1010 Case: paso 7, imagen 2 de 3 Disassembling Olympus Stylus 1010 Case: paso 7, imagen 3 de 3
    • Using a plastic spudger, lift up the black clips.

    • Still using the plastic spudger, detach the gold connector strip and white connector strip.

    • Using both hands, pull the camera apart into two pieces.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Max McIntyre

Miembro Desde 01/21/11

526 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 13-4, Forte Winter 2011 Miembro de Cal Poly, Team 13-4, Forte Winter 2011

CPSU-FORTE-W11S13G4

6 Miembros

12 Guías creadas

Un comentario

How did you get the ring around the lens off?? I can't seem to find that step and in all the pictures it's already off

Maureen - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 3,012