Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Press down on the release latch on the bottom of the cover.
-
Once the latch is released, lift the cover from the phone.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert a flat screwdriver between the black body and plastic layer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry the layers apart. The LCD and plastic layer will lift out as one piece.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the screws removed, the logic board can then be lifted out of the body by hand.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Use tweezers to securely grip the microphone, then pull.
-