Introducción

This guide will show you how to remove the microphone from the Nokia 3560.

Partes

No se requieren partes.

  1. Press down on the release latch on the bottom of the cover. Once the latch is released, lift the cover from the phone.
    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

  2. Lift the front case off of the phone body.
    • Lift the front case off of the phone body.

  3. Lift the keypad off of the phone. Lift the keypad off of the phone.
    • Lift the keypad off of the phone.

  4. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  5. The screen is held to the body by six screws.
    • The screen is held to the body by six screws.

  6. Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).
    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

  7. Insert a flat screwdriver between the black body and plastic layer. Insert a flat screwdriver between the black body and plastic layer.
    • Insert a flat screwdriver between the black body and plastic layer.

  8. Pry the layers apart. The LCD and plastic layer will lift out as one piece.
    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

  9. With the screws removed, the logic board can then be lifted out of the body by hand.
    • With the screws removed, the logic board can then be lifted out of the body by hand.

  10. Use tweezers to securely grip the microphone, then pull.
    • Use tweezers to securely grip the microphone, then pull.

    • Be careful not to remove the metal prongs.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Sam Ryan

Miembro Desde 18/04/10

1 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 30-39, Garner Spring 2010 Miembro de Cal Poly, Team 30-39, Garner Spring 2010

CPSU-GARNER-S10S30G39

5 Miembros

16 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,757