Saltar al contenido principal

Partes

No se especificaron partes.

  1. Este paso está sin traducir. Ayuda a traducirlo

    Press down on the release latch on the bottom of the cover. Once the latch is released, lift the cover from the phone.
    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Lift the front case off of the phone body.
    • Lift the front case off of the phone body.

  3. Este paso está sin traducir. Ayuda a traducirlo

    Lift the keypad off of the phone. Lift the keypad off of the phone.
    • Lift the keypad off of the phone.

  4. Este paso está sin traducir. Ayuda a traducirlo

    The screen is held to the body by six screws.
    • The screen is held to the body by six screws.

  5. Este paso está sin traducir. Ayuda a traducirlo

    Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).
    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

  6. Este paso está sin traducir. Ayuda a traducirlo

    Insert a flat screwdriver between the black body and plastic layer. Insert a flat screwdriver between the black body and plastic layer.
    • Insert a flat screwdriver between the black body and plastic layer.

  7. Este paso está sin traducir. Ayuda a traducirlo

    Pry the layers apart. The LCD and plastic layer will lift out as one piece.
    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

Linea de Meta

Sam Ryan

Miembro Desde 18/04/10

1 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 30-39, Garner Spring 2010 Miembro de Cal Poly, Team 30-39, Garner Spring 2010

CPSU-GARNER-S10S30G39

5 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 4

Todo El Tiempo: 1,929