Saltar al contenido principal

Disassembling Nerf Recon CS-6 Shell

Qué necesitas

  1. Disassembling Nerf Recon CS-6 Shell, Remove Magazine: paso 1, imagen 1 de 1
    • Skip this step if magazine is already removed.

    • Pull slide back.

    • Pull backwards on release buttons and slide magazine out.

    • Push slide back forward and pull trigger.

  2. Disassembling Nerf Recon CS-6 Shell, Remove Visible Screws: paso 2, imagen 1 de 1
    • Use the Phillips #0 Screwdriver to remove these 9 screws.

    • All screws marked in red are 9.6 mm Phillips #0 screws.

    • Note that left most screw is longer than the rest and is a 18.6 mm Phillips #0 screw.

  3. Disassembling Nerf Recon CS-6 Shell, Remove Hidden Screws: paso 3, imagen 1 de 2 Disassembling Nerf Recon CS-6 Shell, Remove Hidden Screws: paso 3, imagen 2 de 2
    • Pull slide back to reveal more screws.

    • Remove these 2 screws.

    • Push slide forward.

    • Pull trigger to release compression of the main spring.

    • Screws are 9.6 mm Phillips #0.

    • Pulling the trigger will keep spring from launching out of the gun when the two halves are separated.

  4. Disassembling Nerf Recon CS-6 Shell, Remove Plunger Cap: paso 4, imagen 1 de 1
    • Remove the screws on the plunger cap.

    • Tug the plunger cap off.

    • Screws are 9.6 mm Phillips #0.

  5. Disassembling Nerf Recon CS-6 Shell, Remove Slide Screws: paso 5, imagen 1 de 1
    • Remove the 2 screws on the slide.

    • Screws are 9.6 mm Phillips #0.

    • Hold the two halves of the gun together to prevent any springs from launching out.

  6. Disassembling Nerf Recon CS-6 Shell, Split the Gun in Half: paso 6, imagen 1 de 2 Disassembling Nerf Recon CS-6 Shell, Split the Gun in Half: paso 6, imagen 2 de 2
    • Pull the gun apart at the middle seam.

    • Watch for any springs that might launch out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Asad Qureshi

Miembro Desde 10/22/14

586 Reputación

3 Guías creadas

Equipo

Baylor, Team 8-14, Williams Fall 2014 Miembro de Baylor, Team 8-14, Williams Fall 2014

BU-WILLIAMS-F14S8G14

3 Miembros

6 Guías creadas

2 comentarios

Does anyone have a spare spring for this gun I am missing mine

The Lazy Gamer - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 21

Ultimos 30 días: 55

Todo El Tiempo: 11,665