Repara tus cosas Comunidad Tienda

Disassembling NEC LCD1770NX Monitor Enclosure

Qué necesitas

  1. Disassembling NEC LCD1770NX Monitor Enclosure, Stand: paso 1, imagen 1 de 2 Disassembling NEC LCD1770NX Monitor Enclosure, Stand: paso 1, imagen 2 de 2

    • Place the monitor face down on a clean, flat surface.

    Editar

  2. Disassembling NEC LCD1770NX Monitor Enclosure: paso 2, imagen 1 de 2 Disassembling NEC LCD1770NX Monitor Enclosure: paso 2, imagen 2 de 2

    • Firmly remove the back panel of the stand by pulling it up and away from the monitor.

    Editar

  3. Disassembling NEC LCD1770NX Monitor Enclosure: paso 3, imagen 1 de 2 Disassembling NEC LCD1770NX Monitor Enclosure: paso 3, imagen 2 de 2

    • Unscrew the two 6mm Phillips PH2 screws to detach the stand enclosure from the stand.

    Editar

  4. Disassembling NEC LCD1770NX Monitor Enclosure: paso 4, imagen 1 de 2 Disassembling NEC LCD1770NX Monitor Enclosure: paso 4, imagen 2 de 2

    • Firmly grasp the stand enclosure with your hand and slide it to base of stand.

    Editar

  5. Disassembling NEC LCD1770NX Monitor Enclosure: paso 5, imagen 1 de 1

    • Unscrew the two 14.5mm Phillips PH2 screws holding the stand to the monitor.

    Editar

  7. Disassembling NEC LCD1770NX Monitor Enclosure: paso 6, imagen 1 de 2 Disassembling NEC LCD1770NX Monitor Enclosure: paso 6, imagen 2 de 2

    • Lift the the stand straight up to remove it.

    Editar

  8. Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: paso 7, imagen 1 de 3 Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: paso 7, imagen 2 de 3 Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: paso 7, imagen 3 de 3

    • Place the monitor screen face up.

    • Pull the frame off by placing your fingers on the inside of the frame and pulling out and up, the frame should snap off.

    • Continue your way around the screen.

    Editar

  9. Disassembling NEC LCD1770NX Monitor Enclosure: paso 8, imagen 1 de 3 Disassembling NEC LCD1770NX Monitor Enclosure: paso 8, imagen 2 de 3 Disassembling NEC LCD1770NX Monitor Enclosure: paso 8, imagen 3 de 3

    • Unscrew the two 7mm screws from the bottom of the button assembly.

    • Do not pull the button assembly out too quickly or with too much force! Damage to the wires can occur.

    • Pull the button assembly out a few inches and unplug the colored cables.

    Editar

  10. Disassembling NEC LCD1770NX Monitor Enclosure: paso 9, imagen 1 de 2 Disassembling NEC LCD1770NX Monitor Enclosure: paso 9, imagen 2 de 2

    • Unscrew the gold colored 7mm Phillips PH000 screw holding the button assembly to the monitor.

    • Remove the button assembly from the monitor.

    Editar

  11. Disassembling NEC LCD1770NX Monitor Enclosure: paso 10, imagen 1 de 1

    • With the monitor face-down, unscrew the 5 7mm Phillips PH2 screws around the outside of the enclosure.

    Editar

  12. Disassembling NEC LCD1770NX Monitor Enclosure: paso 11, imagen 1 de 3 Disassembling NEC LCD1770NX Monitor Enclosure: paso 11, imagen 2 de 3 Disassembling NEC LCD1770NX Monitor Enclosure: paso 11, imagen 3 de 3

    • Unscrew the 2 14.5mm Phillips PH2 screws located on the raised center of the enclosure.

    • Carefully pull the enclosure off the monitor.

    Editar

  13. Disassembling NEC LCD1770NX Monitor Enclosure: paso 12, imagen 1 de 2 Disassembling NEC LCD1770NX Monitor Enclosure: paso 12, imagen 2 de 2

    • Unscrew the 10 5mm Philips PH2 screws holding the metal casing to the monitor.

    Editar

  14. Disassembling NEC LCD1770NX Monitor Enclosure: paso 13, imagen 1 de 2 Disassembling NEC LCD1770NX Monitor Enclosure: paso 13, imagen 2 de 2

    • Pull the the metal casing off of the monitor to reveal the motherboards.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 7 otros colaboradores

John Patterson

Miembro Desde 10/19/13

253 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 11-36, Amido Fall 2013 Miembro de Cal Poly, Team 11-36, Amido Fall 2013

CPSU-AMIDO-F13S11G36

5 Miembros

7 Guías creadas

Un comentario

very helpful

Thank you

Richard Morgan - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 14

Todo El Tiempo: 5,764