Introducción

This guide details how to remove the internal backplate to expose the speaker, the headphone jack, and the logic board.

  1. Slide the notch downward while pulling the back cover off to remove it.
    • Slide the notch downward while pulling the back cover off to remove it.

    Agregar Comentario

  2. Use your fingers to push the battery upward from the bottom.
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

    Agregar Comentario

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

    Agregar Comentario

    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

    Agregar Comentario

    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

    Agregar Comentario

    • Carefully pry off the connection between the headphone jack and logic board.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 29-61, Johann Spring 2010 Miembro de Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,242