Repara tus cosas Comunidad Tienda

Motorola V180 Connector Ribbon Replacement

Introducción

Disassembling top half to get to connector ribbon, inside screen, and speaker, make sure to approach the next few steps with precision and caution. In the device a ribbon plays a crucial role for the device's function ability and requires careful disassembly of the phone's components.

Qué necesitas

  1. Motorola V180 Connector Ribbon Replacement, Connector Ribbon: paso 1, imagen 1 de 1

    • Gently tug on the upper edge of the faceplate, and it will easily detach.

    Editar

  2. Motorola V180 Connector Ribbon Replacement: paso 2, imagen 1 de 1

    • Remove the four screws securing the front cover.

    Editar

  3. Motorola V180 Connector Ribbon Replacement: paso 3, imagen 1 de 1

    • Gently glide the metallic silver cover outward.

    • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

    Editar

  4. Motorola V180 Connector Ribbon Replacement: paso 4, imagen 1 de 1

    • Insert a pair of tweezers between the silver and black sections of the cover.

    • The silver section should now easily snap away.

    Editar

  5. Motorola V180 Connector Ribbon Replacement: paso 5, imagen 1 de 1

    • The black rubber component can now easily be taken off.

    Editar

  6. Motorola V180 Connector Ribbon Replacement: paso 6, imagen 1 de 1

    • Use a soldering iron to detach the connector ribbon from the phone.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 7 otros colaboradores

Tyler Knisley

Miembro Desde 05/07/10

1 Reputación

7 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

Cal Poly, Team 6-16, Maness Spring 2010 Miembro de Cal Poly, Team 6-16, Maness Spring 2010

CPSU-MANESS-S10S6G16

4 Miembros

13 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 2,613