Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the phone face-down. Remove the back cover, exposing the battery.
-
Use the Plastic Opening Tool to pry the battery out of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.
-
Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
You should now have all of the pieces separated and disassembled for your device.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Equipo
SUNY Cortland, Team 1-4, Getto Spring 2013 Miembro de SUNY Cortland, Team 1-4, Getto Spring 2013
SUNYCORT-GETTO-S13S1G4
4 Miembros
6 Guías creadas
