Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Disassembling Kodak Easyshare C813 Front Cover

Introducción

This guide demonstrates how to remove the front and back cover from the camera

Qué necesitas

  1. Disassembling Kodak Easyshare C813 Front Cover, Battery: paso 1, imagen 1 de 1

    • Turn off camera by firmly pressing the power button that is located on the top of the camera near the selector dial.

    Traducir

  2. Disassembling Kodak Easyshare C813 Front Cover: paso 2, imagen 1 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 2, imagen 2 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 2, imagen 3 de 3

    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

    Traducir

  3. Disassembling Kodak Easyshare C813 Front Cover, Back Cover: paso 3, imagen 1 de 1
    Herramienta utilizada en este paso:
    Anti-Static Wrist Strap
    $7.95
    Comprar
    Traducir

  4. Disassembling Kodak Easyshare C813 Front Cover: paso 4, imagen 1 de 1

    • Turn the camera off by firmly pressing the power button located on top of the camera.

    Traducir

  6. Disassembling Kodak Easyshare C813 Front Cover: paso 5, imagen 1 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 5, imagen 2 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 5, imagen 3 de 3

    • Locate the 7 screws holding the back cover on.

    • Three screws are located on the bottom of the camera.

    • Two screws are located on the side shown in the photograph.

    • Two final screws are located on the opposite side shown in the photograph.

    Traducir

  7. Disassembling Kodak Easyshare C813 Front Cover: paso 6, imagen 1 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 6, imagen 2 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 6, imagen 3 de 3
    Herramienta utilizada en este paso:
    Phillips #00 Screwdriver
    $5.49
    Comprar

    • Remove all 7 screws:

    • Hold the camera firmly with one hand so that you can still see a screw.

    • Place the Philips 00(Found here)screwdriver into the screw.

    • Turn the screwdriver to the left until it is free.

    • Repeat for the remaining screws.

    Traducir

  8. Disassembling Kodak Easyshare C813 Front Cover: paso 7, imagen 1 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 7, imagen 2 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 7, imagen 3 de 3

    • Use plastic opening tools to slightly open the side of the case.

    • Insert a plastic opening tool and apply pressure to the internal three tabs at the top.

    • The first two are near the words "3X Optical Zoom".

    • The third is near the shutter button.

    Traducir

  9. Disassembling Kodak Easyshare C813 Front Cover: paso 8, imagen 1 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 8, imagen 2 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 8, imagen 3 de 3

    • Gently pull apart the back cover from the rest of the camera.

    • Make sure there are no more screws or tabs keeping the cover on.

    • Use the plastic opening tool to separate any sides still closely connected.

    Traducir

  10. Disassembling Kodak Easyshare C813 Front Cover, Front Cover: paso 9, imagen 1 de 2 Disassembling Kodak Easyshare C813 Front Cover, Front Cover: paso 9, imagen 2 de 2

    • Open the battery door.

    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

    Traducir

  11. Disassembling Kodak Easyshare C813 Front Cover: paso 10, imagen 1 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 10, imagen 2 de 3 Disassembling Kodak Easyshare C813 Front Cover: paso 10, imagen 3 de 3

    • Use the plastic opening tool to lift the casing around the shutter button.

    • Gently remove the front cover from the device.

    Traducir

  12. Disassembling Kodak Easyshare C813 Front Cover: paso 11, imagen 1 de 1

    • Do not touch the terminals shown in the photo. These link to the capacitor which could shock you if not discharged.

    • To discharge the capacitor follow this guide.

    Traducir
Linea de Meta

2 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Susan Marano

Miembro Desde 04/15/10

336 Reputación

7 Guías creadas

Insignias: 16

+ 13 más insignias

Equipo

Cal Poly, Team 24-22, Regan Spring 2010 Miembro de Cal Poly, Team 24-22, Regan Spring 2010

CPSU-REGAN-S10S24G22

4 Miembros

20 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 3,887