Introducción

These instructions will demonstrate how to remove the back plate from the KDDI Kyocera A5521K.

Partes

No se requieren partes.

Turn the phone over to expose the battery cover.
  • Turn the phone over to expose the battery cover.

  • Apply pressure to the back of the battery cover to slide it down.

  • The battery cover is now separate from the phone.

Agregar Comentario

Remove the battery by pushing it up and out from the bottom.
  • Remove the battery by pushing it up and out from the bottom.

  • The battery, cover, and phone should now be separated.

Agregar Comentario

  • Remove the four screws with the Y0 screwdriver.

Agregar Comentario

  • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

  • Remove the two screws with a Y0 screwdriver.

Agregar Comentario

  • Rotate the phone 180 degrees.

  • Carefully separate the back plate from the remainder of the phone.

  • The back plate should now be detached from the rest of the phone.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Dominic Grisafe

Miembro Desde 15/04/10

133 Reputación

10 Guías creadas

Equipo

Cal Poly, Team 28-25, Regan Spring 2010 Miembro de Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Miembros

20 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 2,658