Saltar al contenido principal

Disassembling IBM ThinkPad 560z Upper Case

Qué necesitas

  1. Disassembling IBM ThinkPad 560z Upper Case, Battery Removal: paso 1, imagen 1 de 1
    • Slide the battery release latch to the right.

    • Pull out the battery out towards the front of the device.

  2. Disassembling IBM ThinkPad 560z Upper Case, Upper Case: paso 2, imagen 1 de 1
    • Remove the 7 mm Phillips #0 screws.

    • Remove the 10 mm Phillips #0 screws.

    • Remove the 14 mm Phillips #0 screw.

  3. Disassembling IBM ThinkPad 560z Upper Case: paso 3, imagen 1 de 2 Disassembling IBM ThinkPad 560z Upper Case: paso 3, imagen 2 de 2
    • Open the flap on the left hand side.

  4. Disassembling IBM ThinkPad 560z Upper Case: paso 4, imagen 1 de 2 Disassembling IBM ThinkPad 560z Upper Case: paso 4, imagen 2 de 2
    • Insert the plastic opening tools between the right and left sides of the latch.

    • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

  5. Disassembling IBM ThinkPad 560z Upper Case: paso 5, imagen 1 de 2 Disassembling IBM ThinkPad 560z Upper Case: paso 5, imagen 2 de 2
    • Open the flap on the right side.

  6. Disassembling IBM ThinkPad 560z Upper Case: paso 6, imagen 1 de 1
    • Insert the plastic opening tools towards the right side of the latch.

    • Gently pry the right side out to release the top cover.

  7. Disassembling IBM ThinkPad 560z Upper Case: paso 7, imagen 1 de 2 Disassembling IBM ThinkPad 560z Upper Case: paso 7, imagen 2 de 2
    • Lift the keyboard slowly.

    • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

  8. Disassembling IBM ThinkPad 560z Upper Case: paso 8, imagen 1 de 1
    • Use your fingers or a spudger to detach the connector.

  9. Disassembling IBM ThinkPad 560z Upper Case: paso 9, imagen 1 de 2 Disassembling IBM ThinkPad 560z Upper Case: paso 9, imagen 2 de 2
    • Carefully lift and remove the keyboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 26-27, Regan Spring 2010 Miembro de Cal Poly, Team 26-27, Regan Spring 2010

CPSU-REGAN-S10S26G27

3 Miembros

18 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 1,729