Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the device to the backside, and locate the metal tab at the center of the back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the metal tab up, and rotate it counterclockwise. This will unlock the back case cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the battery plate off to either insert or remove 2 AA batteries.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the wedge side of a spudger (or a small, flat head screwdriver), remove the black rubber case support from the device body.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the pick side of a spudger (or tweezers), peel the sticky tape from the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Split the front and rear panels by inserting a small pointed tool (such as a pen point or a screwdriver tip SL1.5) in the 5 plastic tabs along the sides of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With tweezers (or your fingernails), carefully disconnect the wires between the PC input and the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The motherboard should look like this. If it is dirty, gently use a small paintbrush to clean it of dust.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the pointed end of a spudger (or the small end of a Philips #00 screwdriver), gently unhook the small black tabs by pressing into the interlocking hooks that are sunk into the white wire connector.
-
Gently pull the wire ribbon from the white connector.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
Equipo
Cal Poly, Team 21-30, Regan Fall 2010 Miembro de Cal Poly, Team 21-30, Regan Fall 2010
CPSU-REGAN-F10S21G30
3 Miembros
5 Guías creadas
6 comentarios
Hello, friend. Name’s Arthur. I have this old Garmin Etrex H GPS device (the yellow one) and it looks very similar to your Etrex Vista H, but it has no stick button. The disassembling method suited just fine here, so I thank you Sir for this tutorial. I was trying to disassembly my Garmin because I am having a problem with its display. There’s a vertical line that its not displaying, so I decided to take a look. However, there was something strange. The display contacts were not locked by a connector, but by something like a durex tape. Seemed very precarious. Have you ever disassembled this yellow Etrex H model? Any ideas on how to solve my problem?
I forgot to remove battery for years and the battery chamber got damaged. So chamber was cleaned and repaired but now I cannot on it.
