Dificultad
Fácil
Pasos
10
Tiempo Requerido
1 minuto
- Disassembling Compaq Mini 110 Battery 2 Pasos
- RAM 2 Pasos
- Keyboard 4 Pasos
- Hard Drive 2 Pasos
Necesita Mejores Imágenes
Mejores fotos mejorarán esta guía. Ayuda tomando, editando o subiendo nuevas imágenes!
Percance de Marcado
Esta guía necesita mejores marcas. Ayuda corrigiendo o haciendo algunas anotaciones de marcado.
Falta un Paso
Uy! Esta guía actualmente le faltan algunos pasos importantes.
Imágenes Inconsistentes
Actualizando las imágenes de esta guía para que sean más consistente con los requisitos previos aumentaran su genialidad.
Partes
No se requieren partes.
-
Find the battery and the battery tabs located on the bottom of the Compaq Mini.
-
Push the tabs inward and slide the battery out.
-
Find and remove the two screws on the bottom of your Compaq Mini covering the memory compartment.
-
Push out side tabs.
-
Remove the rubber pads located on the corners of your Compaq Mini.
-
Unscrew all the corner screws. There are four total, one under each rubber pad.
-
Unscrew the screw for the bottom case located in the RAM compartment.
Falta um passo, pois nos modelos COMPAQ MINI 110, existe um parafuso que segura o teclado, que se encontra bem escondido dentro da cavidade que encaixa a bateria.
-
Remove the three screws in the silver tabs at the back of the keyboard. The red circles show where they are located at the back of the base under the screen.
3 screws in red circles are actually on metal tabs in the battery compartment, 1 deeper than the other 2. There is a keyboard symbol for each of the 3 screws.
Step 8B: Lift out keyboard by pushing upwards on the 2 accessible metal tabs. This is the most difficult step. Lack of Quality Control during assembly may prevent the kevboard from lifting out without breaking!!
-
Remove the three screws.
-
Pull up on the tab.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
10 personas más completaron esta guía.
Equipo
Cal Poly, Team 22-2, Maness Fall 2010 Miembro de Cal Poly, Team 22-2, Maness Fall 2010
CPSU-MANESS-F10S22G2
6 Miembros
20 Guías creadas
