Repara tus cosas

Derecho a reparar

Tienda

Disassembling Compaq Mini 110 Fan

Escrito Por: alea (y 5 de otros participantes)
  • Comentarios: 3
  • Favoritos: 5
  • Terminaciones: 1

Dificultad

Fácil

Pasos

14

Tiempo Requerido

1 minuto

Secciones

6

Banderas

5

Needs Better Images

Necesita mejores imágenes

Mejores fotos mejorarán esta guía. Ayuda tomando, editando o subiendo nuevas imágenes!

Missed a Step

Falta un paso

Uy! Esta guía actualmente le faltan algunos pasos importantes.

Inconsistent Images

Imágenes Inconsistentes

Actualizando las imágenes de esta guía para que sean más consistente con los requisitos previos aumentaran su genialidad.

Action Shots

Fotos de acción

Sé un héroe de acción! Esta guía necesita imágenes que demuestren mejor cómo llevar a cabo acciones específicas.

Markup Mishap

Error de marcado

Esta guía necesita mejores marcas. Ayuda corrigiendo o haciendo algunas anotaciones de marcado.

Introducción

Abolish the noisy bugger and put in a powerfully quiet cooling device.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Find the battery and the battery tabs located on the bottom of the Compaq Mini. Find the battery and the battery tabs located on the bottom of the Compaq Mini.

    • Find the battery and the battery tabs located on the bottom of the Compaq Mini.

    Editar

  2. Push the tabs inward and slide the battery out. Push the tabs inward and slide the battery out. Push the tabs inward and slide the battery out.

    • Push the tabs inward and slide the battery out.

    Editar

  3. Unscrew the two screws on the bottom of the laptop covering the memory compartment. The screws are attached to the panel.

    • Unscrew the two screws on the bottom of the laptop covering the memory compartment.

    • The screws are attached to the panel.

    Editar

  4. Push out side tabs.

    • Push out side tabs.

    Editar

  5. Remove the rubber pads located on the corners of your Compaq Mini. There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.

    • Remove the rubber pads located on the corners of your Compaq Mini.

    • There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.

    Editar

  7. Unscrew all the corner screws. There are four total, one under each rubber pad. Unscrew all the corner screws. There are four total, one under each rubber pad.

    • Unscrew all the corner screws. There are four total, one under each rubber pad.

    Editar

  8. Unscrew the screw for the bottom case located in the RAM compartment. Unscrew the screw for the bottom case located in the RAM compartment.

    • Unscrew the screw for the bottom case located in the RAM compartment.

    Editar

  9. Remove the three screws in the silver tabs at the back of the keyboard. The red circles show where they are located at the back of the base under the screen. Remove the three screws in the silver tabs at the back of the keyboard. The red circles show where they are located at the back of the base under the screen.

    • Remove the three screws in the silver tabs at the back of the keyboard. The red circles show where they are located at the back of the base under the screen.

    Editar

  10. Remove the eight screws from the plastic top cover.

    • Remove the eight screws from the plastic top cover.

    Editar

  11. Pry up the top plastic cover using a spudger. Under the screen there are two tabs that need to be pushed in. Under the screen there are two tabs that need to be pushed in.

    • Pry up the top plastic cover using a spudger.

    • Under the screen there are two tabs that need to be pushed in.

    Editar

  12. Careful lifting up the cover because the track pad is still attached. Remove the cable by pulling it up.

    • Careful lifting up the cover because the track pad is still attached.

    • Remove the cable by pulling it up.

    Editar

  13. Remove the three screws.

    • Remove the three screws.

    Editar

  14. Pull up on the tab. Pull up on the tab.

    • Pull up on the tab.

    Editar

  15. Remove the two screws holding the fan in place. There is still a cable attached to the fan so be sure to pull that out as well.

    • Remove the two screws holding the fan in place.

    • There is still a cable attached to the fan so be sure to pull that out as well.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 5 otros colaboradores

alea

Miembro Desde 06/10/10

1,366 Reputación

14 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

Cal Poly, Team 22-2, Maness Fall 2010 Miembro de Cal Poly, Team 22-2, Maness Fall 2010

CPSU-MANESS-F10S22G2

6 Miembros

20 Guías creadas

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 6,312