Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
The outer casing covers the internal mechanisms of the camera.
Qué necesitas
-
-
Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.
-
Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.
-
Remove the last screw (2.59 mm) located on the bottom of the camera.
-
Slowly pull the back cover of the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.