Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide will instruct the user on how to remove the front cover of the Canon A590 IS.
Qué necesitas
-
-
-
Remove the screw located under the rubber flap on the left side of the camera using a Phillips #00 screwdriver.
-
-
-
Press and hold down the button shown in the blue circle.
-
While pressing the button, rotate the lens cover in a counter-clockwise direction to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
3 comentarios
A handy guide. I had an A590IS with a broken battery door latch on the camera body, and I managed to obtain a dead A590IS with a fully intact latch for free. So using this guide I swapped the body shells over! All fixed and working again!