Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 7.9 mm screws using a Phillips #1 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the blue lever from its slot by pushing it back and twisting clockwise.
-
Close the scanner compartment and cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry open the side cover with the plastic opening tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the printer over so that the bottom of the printer is facing you.
-
Use the plastic opening tool to remove the corner of the side panel from the plastic pin.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to loosen the side panel from the bottom of the printer.
-
Cancelar: No complete esta guía.
6 personas más completaron esta guía.
2 comentarios
Good job!!!!
Where is the rest of disassembly?