Saltar al contenido principal

Introducción

This guide will show you how to disassemble the back and side panel of the printer.

Partes

No se especificaron partes.

  1. Disassembling Canon Pixma MP480 Rear and Side Panel, Rear and Side Panel: paso 1, imagen 1 de 2 Disassembling Canon Pixma MP480 Rear and Side Panel, Rear and Side Panel: paso 1, imagen 2 de 2
    • Remove the two 7.9 mm screws using a Phillips #1 screwdriver.

  2. Disassembling Canon Pixma MP480 Rear and Side Panel: paso 2, imagen 1 de 1
    • Lift up the back cover to remove it.

    • You may need to lift firmly as it requires quite a bit of force.

  3. Disassembling Canon Pixma MP480 Rear and Side Panel: paso 3, imagen 1 de 1
    • Open the front tray.

  4. Disassembling Canon Pixma MP480 Rear and Side Panel: paso 4, imagen 1 de 2 Disassembling Canon Pixma MP480 Rear and Side Panel: paso 4, imagen 2 de 2
    • Open the scanner compartment.

    • Make sure the blue lever locks into place to keep the compartment open.

  5. Disassembling Canon Pixma MP480 Rear and Side Panel: paso 5, imagen 1 de 2 Disassembling Canon Pixma MP480 Rear and Side Panel: paso 5, imagen 2 de 2
    • Remove the blue lever from its slot by pushing it back and twisting clockwise.

    • Close the scanner compartment and cover.

  6. Disassembling Canon Pixma MP480 Rear and Side Panel: paso 6, imagen 1 de 2 Disassembling Canon Pixma MP480 Rear and Side Panel: paso 6, imagen 2 de 2
    • Pry open the side cover with the plastic opening tool.

  7. Disassembling Canon Pixma MP480 Rear and Side Panel: paso 7, imagen 1 de 2 Disassembling Canon Pixma MP480 Rear and Side Panel: paso 7, imagen 2 de 2
    • Flip the printer over so that you are facing the bottom of the printer.

    • Use the plastic opening tool to remove the corner of the side panel from the plastic pin.

  8. Disassembling Canon Pixma MP480 Rear and Side Panel: paso 8, imagen 1 de 2 Disassembling Canon Pixma MP480 Rear and Side Panel: paso 8, imagen 2 de 2
    • Use the plastic opening tool to loosen the side panel from the bottom of the printer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Kevin Cole

Miembro Desde 17/01/13

116 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 19-41, Regan Winter 2013 Miembro de Cal Poly, Team 19-41, Regan Winter 2013

CPSU-REGAN-W13S19G41

4 Miembros

6 Guías creadas

2 comentarios

Where is the rest of disassembly?

bill roberts - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 15

Ultimos 30 días: 59

Todo El Tiempo: 19,959