Repara tus cosas Comunidad Tienda

Disassembling Canon EOS Rebel XS Front Cover

Introducción

Use this guide to replace a damaged front cover or to access the inner parts of the camera.

Qué necesitas

  1. Disassembling Canon EOS Rebel XS Front Cover, Latch Side Cover: paso 1, imagen 1 de 1

    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

    Editar

  2. Disassembling Canon EOS Rebel XS Front Cover: paso 2, imagen 1 de 1

    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

    Editar

  4. Disassembling Canon EOS Rebel XS Front Cover, Disassembling Canon EOS Rebel XS Front Cover: paso 3, imagen 1 de 1

    • Remove three medium length screws from the bottom of the camera

    Editar

  5. Disassembling Canon EOS Rebel XS Front Cover: paso 4, imagen 1 de 1

    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 8 otros colaboradores

Daniel Bussone

Miembro Desde 01/28/11

1,251 Reputación

11 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

Cal Poly, Team 3-41, Regan Winter 2011 Miembro de Cal Poly, Team 3-41, Regan Winter 2011

CPSU-REGAN-W11S3G41

2 Miembros

21 Guías creadas

2 comentarios

This should be labelled: Easy.

tjt263 - Contestar

Okay, there are several steps missing.

tjt263 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 5,260