Introducción

This is a step-by-step guide to remove the outer case on the AirPort Extreme Model A1034.

Partes

No se requieren partes.

  1. Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.
    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

    Agregar Comentario

  2. Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.
    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

    Agregar Comentario

    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

    Agregar Comentario

    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Travis Go

Miembro Desde 12/10/11

158 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 17-15, Regan Fall 2011 Miembro de Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 2,517