Repara tus cosas Comunidad Tienda

Dirt Devil Scorpion Quick Flip Power Cord Replacement

Introducción

The power cord on the Dirt Devil Scorpion Quick Flip has been known to fail by consumers. This guide walks you through the replacement of a power cord on one of these vacuums.

Qué necesitas

  1. Dirt Devil Scorpion Quick Flip Power Cord Replacement, Power Cord: paso 1, imagen 1 de 1

    • While holding the device by the handle, press the button on the left-hand side of the vacuum handle in order to release the nozzle from the body.

    Editar

  2. Dirt Devil Scorpion Quick Flip Power Cord Replacement: paso 2, imagen 1 de 2 Dirt Devil Scorpion Quick Flip Power Cord Replacement: paso 2, imagen 2 de 2

    • Using a Phillips #1 Screwdriver, remove all six of the 4 mm screws holding the shell together.

    Editar

  4. Dirt Devil Scorpion Quick Flip Power Cord Replacement: paso 3, imagen 1 de 1

    • Using utility scissors, cut the black and white cables approximately an inch and a half above where they connect to the faulty power cord.

    Editar

  5. Dirt Devil Scorpion Quick Flip Power Cord Replacement: paso 4, imagen 1 de 1

    • Using a soldering iron, fuse the black and white cables from the new power cord to where the previous cord was cut away.

    • Using electrical tape, cover the exposed area.

    • Check out our How to Solder and Desolder Connections guide if you are unfamiliar with the soldering process.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 2

Ultimos 30 días: 14

Todo El Tiempo: 293