Partes

No se requieren partes.

  1. Remove the cushion from both speakers.
    • Remove the cushion from both speakers.

  2. On the right speaker, remove the 4 screws shown.
    • On the right speaker, remove the 4 screws shown.

    • Remove the plastic plate , but be careful not to damage the speaker wires.

    • On the bottom left of the board, near the power button, are LED0 through LED3. The odd numbered LEDs are blue, and the even numbered LEDs are red.

    • With the sharpie, carefully mark the tops of the LEDs. Alternatively, if you want to black out the lights entirely, use very small pieces of electrical tape to cover them.

    • It's a good idea to verify the color of each LED by powering on the headset while it's open.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ian

Miembro Desde 07/12/18

548 Reputación

1 Guía escrita

Equipo

Kid fixers Miembro de Kid fixers

Community

86 Miembros

48 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 5

Últimos 30 Días: 16

Todo El Tiempo: 18