Saltar al contenido principal

Digiland DL1168A Front/Rear Camera Replacement

Qué necesitas

  1. Digiland DL1168A Front/Rear Camera Replacement, Rear Case: paso 1, imagen 1 de 1
    • Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.

    • Continue prying the edges while moving around the device's perimeter until the back can be easily removed.

  2. Digiland DL1168A Front/Rear Camera Replacement: paso 2, imagen 1 de 2 Digiland DL1168A Front/Rear Camera Replacement: paso 2, imagen 2 de 2
    • Carefully lift back panel away from the body of the device.

    • Be gentle when lifting the back panel. The speaker wires are still connected to both the front and back panel.

  3. Digiland DL1168A Front/Rear Camera Replacement: paso 3, imagen 1 de 2 Digiland DL1168A Front/Rear Camera Replacement: paso 3, imagen 2 de 2
    • Desolder the four wires connecting the rear case to the motherboard.

    • Disconnect the wires from the motherboard.

    • Remove the rear case from the device.

  4. Digiland DL1168A Front/Rear Camera Replacement, Front/Rear Camera: paso 4, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar
    • Use tweezers to remove the cover that keeps the camera lens in place.

  5. Digiland DL1168A Front/Rear Camera Replacement: paso 5, imagen 1 de 1
    • Use tweezers to gently begin to lift the back piece off.

    • Lift gently because the lens is connected to the back piece by a small cord.

  6. Digiland DL1168A Front/Rear Camera Replacement: paso 6, imagen 1 de 1
    • After lifting gently both the lens and the back piece will be removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 5

Todo El Tiempo: 112