Repara tus cosas Comunidad Tienda

DigiLand DL1010Q Rear Case Replacement

Introducción

This guide will allow you to access the inside parts of this device

Qué necesitas

  1. DigiLand DL1010Q Rear Case Replacement, Rear Case: paso 1, imagen 1 de 1

    • With a J00 Philips head screwdriver, unscrew the two 4mm black screws located at the bottom of the device.

    • Before disassembling your device, be sure it is powered off.

    Traducir

  3. DigiLand DL1010Q Rear Case Replacement: paso 2, imagen 1 de 2 DigiLand DL1010Q Rear Case Replacement: paso 2, imagen 2 de 2

    • Using a plastic opening tool, begin softly prying open device by first inserting it in between the front and back panels.

    • Continue prying the edges while moving around the device's perimeter until the back can be easily removed.

    Traducir

  4. DigiLand DL1010Q Rear Case Replacement: paso 3, imagen 1 de 1

    • Carefully lift back panel away from the body of the device.

    • Speaker wires are connected to both the front and back panel.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 9

Todo El Tiempo: 516