Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement - Guía de reparación iFixit

Introducción

By the end of they guide you will have adjusted the height of the device

Qué necesitas

Paso 1 Unplug

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement, Unplug: paso 1, imagen 1 de 1

Before you begin, remember to disconnect the mains plug.

Paso 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 2, imagen 1 de 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 2, imagen 2 de 2

Remove the dust extraction nozzle, blade and edge guide.
Refer to the instructions for the device to remove them.

Paso 3

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 3, imagen 1 de 1

Open wide to free up space for a better work area.

Paso 4

Using a large pat screwdriver, remove the small pin.

Paso 5

Then remove the black rod.

Paso 6

And finally unscrew the nut.

Paso 7

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 7, imagen 1 de 1

Here is the order of the parts to remove.

Paso 8

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 8, imagen 1 de 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 8, imagen 2 de 2

Then we replace the height adjustment.

Paso 9

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 9, imagen 1 de 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 9, imagen 2 de 2

Finally put each piece back in order.
To tighten, simply replace the tray at the bottom and hand tighten the nut.
With the lever, take the nut and put it in the locked position without effort
It should be tight but not touching the board.

Paso 10

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 10, imagen 1 de 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: paso 10, imagen 2 de 2

Replace the blade, edge guide, and extraction bit on the saw.

Conclusión

to reassemble perform the steps in reverse order.

Un agradecimiento especial a estos traductores:

fr en

100%

HelloMacOS

¡ HelloMacOS nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Autor

con 1 otro colaborador

Céline Chemineau

Miembro Desde 01/29/20

16,581 Reputación

95 Guías creadas

+ 9 más insignias

Equipo

Leroy Merlin Miembro de Leroy Merlin

Community

36 Miembros

239 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 32

Todo El Tiempo: 1,241