Saltar al contenido principal

Dexter 750W Pendular Button Replacement Corded Jigsaw

Qué necesitas

  1. Dexter 750W Pendular Button Replacement Corded Jigsaw, Unplug: paso 1, imagen 1 de 1
    • Before you begin, remember to disconnect the mains plug.

  2. Dexter 750W Pendular Button Replacement Corded Jigsaw: paso 2, imagen 1 de 1
    • Remove the vacuum adapter from the back of the device.

  3. Dexter 750W Pendular Button Replacement Corded Jigsaw: paso 3, imagen 1 de 2 Dexter 750W Pendular Button Replacement Corded Jigsaw: paso 3, imagen 2 de 2
    • Using a screwdriver or screwdriver, unscrew and open the device.

    • Unlock the tray by lifting the lever.

    • Using pliers remove the blade roller.

    • Remove the steel bar and remove the orange button.

  4. Dexter 750W Pendular Button Replacement Corded Jigsaw: paso 6, imagen 1 de 1
    • Be careful when removing the orange button not to lose the ball and the spring.

  5. Dexter 750W Pendular Button Replacement Corded Jigsaw: paso 7, imagen 1 de 2 Dexter 750W Pendular Button Replacement Corded Jigsaw: paso 7, imagen 2 de 2
    • Replace the ball and spring on the new button.

    • Put it back in the machine.

  6. Dexter 750W Pendular Button Replacement Corded Jigsaw: paso 8, imagen 1 de 1
    • Replace the blade roller.

  7. Dexter 750W Pendular Button Replacement Corded Jigsaw: paso 9, imagen 1 de 1
    • Close and screw the device.

Conclusión

To reassemble perform steps in reverse

Un agradecimiento especial a estos traductores:

fr en

100%

¡ HelloMacOS nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Céline Chemineau

Miembro Desde 01/29/20

16,581 Reputación

95 Guías creadas

Equipo

Leroy Merlin Miembro de Leroy Merlin

Community

36 Miembros

239 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 145