Saltar al contenido principal

Introducción

This guide will show you how to replace the gear wheel

Herramientas

Partes

No se especificaron partes.

  1. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement, Unplug: paso 1, imagen 1 de 1
    • Before starting, remember to disconnect the outlet from the area.

  2. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 2, imagen 1 de 2 Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 2, imagen 2 de 2
    • Remove the three screws from the pad.

    • Then the three screws of the holding flange.

  3. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 3, imagen 1 de 3 Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 3, imagen 2 de 3 Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 3, imagen 3 de 3
    • Be careful to keep the three small balls.

  4. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 4, imagen 1 de 2 Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 4, imagen 2 de 2
    • Unscrew the screws to open the shell.

  5. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 5, imagen 1 de 2 Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 5, imagen 2 de 2
    • Remove the pendulum and recover the bearing.

  6. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 6, imagen 1 de 1
    • Remember to put back some fat before replacing the new pendulum.

    • Replace the new part.

  7. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 7, imagen 1 de 1
    • Before closing, check that no cables are blocked and that each room is in its housing.

    • Replace the screws on the shell.

  8. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 8, imagen 1 de 3 Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 8, imagen 2 de 3 Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 8, imagen 3 de 3
    • Replace the holding flask, be careful to have the three small balls.

  9. Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 9, imagen 1 de 2 Dexter 300W Corded Delta Sander - 300DS2.5 Toothed Wheel Replacement: paso 9, imagen 2 de 2
    • Line the three screws of the holding flange and then that of the pad.

Conclusión

To reassemble follow guide or in reverse

Un agradecimiento especial a estos traductores:

fr en

100%

¡ HelloMacOS nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Céline Chemineau

Miembro Desde 29/01/20

16,032 Reputación

95 Guías creadas

Equipo

Leroy Merlin Miembro de Leroy Merlin

Community

36 Miembros

197 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 11

Todo El Tiempo: 67