Repara tus cosas Comunidad Tienda

Dexcom G6 Receiver Display and Front Bezel Replacement

Introducción

This guide will show you how to disconnect the display and display frame from the motherboard.

Qué necesitas

  1. Dexcom G6 Receiver Display and Front Bezel Replacement, Display and Front Bezel: paso 1, imagen 1 de 1

    • Unscrew the 6 Torx T5 screws from the back of the device

    Editar

  3. Dexcom G6 Receiver Display and Front Bezel Replacement: paso 2, imagen 1 de 2 Dexcom G6 Receiver Display and Front Bezel Replacement: paso 2, imagen 2 de 2

    • Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

    • Screen Information: Model AM0310R-04 Lot # NHT18080052

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Andrew S

Miembro Desde 07/30/21

14,993 Reputación

8 Guías creadas

Insignias: 30

+ 27 más insignias

4 comentarios

Where can the replacement parts be found? And a charging port?

Ron Magliacane - Contestar

Also looking 2 the display. Have 2 dexcom receivers here and both with broken displays.

Jeroen - Contestar

I'm not sure if you can find the displays anywhere. The only number (presumably model number) I could find on the screen was AM0310R-04 and the Lot Number NHT18080052.

Andrew S -

Sharewith us where we can find the displays to buy

Jeroen - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 24

Todo El Tiempo: 1,018