Introducción
El Macintosh IIsi venía con una "SuperDrive" de 1.44MB de cinta roja (y sí, al igual que las "SuperDrives" para grabar DVD, esta era la mejor opción disponible)
Qué necesitas
-
-
Empieza por darle la vuelta al ordenador, y quita este tornillos Phillips #0.
-
-
-
-
El "SuperDrive" está montado similarmente al disco duro. y alojado justo a su lado.
-
Saca estas dos pestañas, y levanta la unidad hacia arriba.
-
-
-
Da la vuelta a la unidad para que esté encima de la fuente de alimentación, y quita el cable de "Cinta-Roja".
-
La unidad fue manufacturada por Sony en 1990.
Excellent pictures and easy guide! Thank you very much. My IISI floppy drive started flawlessly after 25y and the disk could be read. however it did it just once. Then I could not eject it any more. It did not work anymore. Can I replace it with a Sony MPF 920E? What type of cableadapter do I need
Generally these old Macs only work with Apple style floppy drives, they use both a different cable and signaling standard than PC drives. If your drive isn't ejecting your best bet is to either replace it with a similar 1.44MB "SuperDrive", or service the drive. There are some good videos floating around the web about how to repair and maintain these old drives, and it isn't actually too hard to disassemble and clean them.
-
Para volver a montar tu dispositivo, sigue estas instrucciones en sentido inverso.
Para volver a montar tu dispositivo, sigue estas instrucciones en sentido inverso.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
¡ Angel nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›