Introducción
Hace un año, desmontamos el nuevo y radical iPhone 6—y no lo hicimos tan mal. Ahora, Apple dice que metió un montón de tecnología nuevo en un teléfono que es imperceptiblemente más grueso, unos gramos más pesados, y bastantes tonos más rosado: iPhone 6s. ¿Qué significa y cómo afectará la reparabilidad de nuestro teléfono favorito? Acompáñanos EN VIVO para enterarte—¡es hora de desmontar!
¿Es el desmontaje del 6s no lo suficiente grande para ti? Entonces querrás ver nuestro Desmontaje de iPhone 6s Plus.
Un gran y cordial mega-agradecimiento a nuestros amigos de Chipworks por ayudarnos a identificar todas las partes. No lo hubiéramos podido hacer sin ellos. Fíjense en su blog de desmontaje.
Chipworks está también publicando un informe de desmontaje de producto completo
Regístrate aquí para recibirlo gratis!
¡Prepárate para más desmontaje! Síguenos en
Facebook, Instagram, oTwitter para recibir las más recientes noticias de desmontajes.
Qué necesitas
Resumen del Video
-
-
El 6s podría verse igual que el iPhone del año pasado, pero hay una gran cantidad de nuevas especificaciones técnicas:
-
Procesador Apple A9 con coprocesador de movimiento M9 integrado
-
Almacenamiento de 16, 64 o 128 GB.
-
Pantalla de Retina HD con Tacto 3D de 4.7 pulgadas 1334x750 píxeles (326 ppi)
-
Cámara de 12 MP iSight (con soporte de 4K de grabación de vídeo con 1.22 μ píxeles y una cámara FaceTime de 5 MP.
-
Caja de aluminio Serie 700 y vidrio Ion-X
-
802.11a/b/g/n/ac Wi‑Fi con MIMO + Bluetooth 4.2 + NFC + LTE de 23 bandas.
-
Motor Táptico
-
-
-
Es finalmente hora de ver lo que este nuevo iPhone revolucionario tiene guardado para nosotros:
-
A primera vista, el 6s es el vivo retrato de su hermano mayor, pero hay más de lo que podemos ver. Aquí te mostramos lo que esconde:
-
Botón de Inicio y ID Táctil mejorado
-
Cámara de 5 MP HD FaceTime
-
Pantalla Retina HD con 3D Touch
-
Al inspeccionarlo más de cerca, el 6s es un poquito más grande que el 6 (138,3 x 67,1 x 7,1 mm vs. 138,1 x 67,0 x 6,9 mm) y está estampado con un número nuevo de modelo: A1688.
-
El 6s lleva además algo más de peso si se lo compara con su hermano mayor, pesando 143 gramos en vez de los 129 gramos del 6.
-
-
-
Pasa tu ratón por encima para obtener súper poderes— tenemos rayos X disponibles, gracias a nuestros valientes secuaces en Creative Electron.
-
Juntos hicimos un viaje largo a Australia para traerte el primer vistazo del interior del último iPhone.
-
Nuestro desmontaje te llega en vivo desde Macfixit y Circuitwise. Muchísimas gracias por su hospitalidad y su ventaja de 17 horas de huso horario.
-
¡Es solo una muestra de lo que está por venir! ¡Que comience el desmontaje!
-
-
Herramienta utilizada en este paso:iSclack$24.99
-
Lo dijimos antes y lo decimos ahora de nuevo: Apple se ocupa de los pequeño detalles. Los tornillos Pentalobe en la parte inferior de la carcasa tienen el mismo color que la carcasa. Oh, Apple.
-
Pareciera que el ensamblaje de pantalla de iPhone se ha hecho más fuerte desde que nos encontramos la última vez. Ahora tiene cuatro tiras adhesivas que forran el perímetro del teléfono.
-
Aun así, este fuerte adhesivo no puede competir con nuestro polifacético iSclack.
-
Las pantallas de iPhone de antaño no corrían peligro de caerse del teléfono, entonces ¿por qué la necesidad de adhesivo—o podría ser una junta resistente al agua?
What's the white strip between display assembly and the housing on the 3rd pic of Step 4?
That's part of the display assembly adhesive strip.
Looks like the adhesive strip has a lot to do with the 6S being water resistant. I assume once open the device will lose that capability.
No, offcourse not, it was not for waterproof..... they did it because they won't acknowledge the design flaw for the display. Almost every iPhone 6 have problems with 'clicking sound' from the display when pressing in the corners. They have replaced so much iPhones for this problem, so they added the adhesive on the 6S to avoid this problem....
-
-
-
Con el ensamblaje de pantalla ya fuera, podemos vislumbrar algunas diferencias internas entre el 6s y su predecesor.
-
El flamante Motor Táptico ocupa una gran cantidad de espacio debajo de la batería, lo que podría explicar la ligera reducción en el tamaño de la batería.
-
Apple también redujo las conexiones del ensamblaje de pantalla a tres cables, en vez de los cuatro cables vistos en el iPhone 6.
-
-
-
Un giro rápido y el conector de la batería se desconecta.
-
A pesar del efecto Coriolis, para los destornilladores es todavía ajustar hacia la derecha, aflojar hacia la izquierda—aún allí abajo. Así que para aquellos que se preguntaron—sí, todavía giramos hacia la izquierda.
-
Una vez dentro, encontramos, como esperábamos, los tornillos Phillips. Nos alegramos que Apple limita la inclusión de tornillos Pentalobe solo en la parte inferior de la caja trasera.
-
-
-
Luego de utilizar el spudger con cuidado, liberamos el ensamblaje de pantalla sin mucha pelea.
-
El ensamblaje de pantalla pesa 60 gramos —un incremento de 15 gramos comparado con el peso en el iPhone 6. De hecho, es el mismo peso de la pantalla mucho más grande del iPhone 6 Plus del año pasado. Los sensores capacitivos adicionales que Apple integró en la luz de fondo de la pantalla han realmente fortalecido las cosas.
-
Salvo por la reducción en cables y el diseño levemente diferente de la placa protectora de LCD, los ensamblajes de pantalla nuevos y viejos parecenser visualmente similares.
-
-
-
Para sacar la placa protectora primero debemos remover un soporte, altavoz y la cámara FaceTime.
-
Si bien la cámara FaceTime ha saltado de 1.2 MP hasta 5 MP, su forma en general se mantiene sorpresivamente similar.
-
Necesitamos tomarnos un momento para calmarnos mientras nos acercamos a desenterrar los secretos del ensamblaje nuevo de pantalla 3D Touch.
-
-
Herramienta utilizada en este paso:Pro Tech Toolkit$74.95
-
Con la placa protectora de LCD fuera del camino, damos nuestro primer vistazo a lo que creemos que es el Circuito Integrado 3D Touch:
-
343S00014 (el plan de nombramiento es muy similar a los otros CI de Apple, pero todavía no se ha alcanzado ningún consenso sobre el fabricante)
-
Por otro lado, queremos (nuevamente) agradecer a nuestros buenos amigos de MacFixit Australia por dejarnos utilizar su oficina en Melbourne para este desmontaje. Tienen accesorios/actualizaciones para Mac y iPhone, y también venden nuestros kits de herramientas iFixit. ¡Gracias, MacFixit Australia!
Word is out that the 3D touch IC is from Cirrus who also do the audio & speaker amp on this phone.
Inside source, 3D touch chip is 100% manufactured by LG Electronics in China factory.
Apple initially ordered from 3 different vendors, but only LG Electronics was able to meet Apple's requirements.
Confirmed by friend who works at LG and he was at that factory for 1 month until Sept 25 for production rate and quality checks.
wat2lose -
Additional to the 3D-Touch-IC there must be some Force-Touch sensor structures (strain gauges like the Trackpads' ones or capacitive etc.) to get the applied finger forces detected. Is there any wiring or some structure able to see? I guess it is between glass surface and this metal shield...
-
-
-
-
Al remover la placa protectora tenemos acceso al botón de inicio.
-
Es muy fácil extraer el botón de inicio de su cómodo lugar. Si hay problemas con el botón de inicio, la ausencia de soldaduras o adhesivo harán la reparación más fácil.
-
Hasta ahora, no hay evidencia de ningún chip responsable para "la más rápida y mejor que nunca" Touch ID, pero eh, si Apple lo dice, debe ser verdad.
-
-
-
De vuelta a las tachuelas rosa doradas... Es hora de remover el nuevo Motor Táptico del iPhone.
-
Una ráfaga de radiación de rayos X revela un vistazo al mecanismo linear oscilante que es la base de la maravilla mecánica más reciente de Apple, y que se dice que alcanza un pico de salida luego de solo una oscilación.
-
Una vez removido, no hay mucho que mostrar dentro—solo un par de contactos de resorte, un marcado codificado y una etiqueta completa con el logotipo de Apple.
Any supercapacitors in there? Specifically, anything by CAP-XX?
-
-
-
Suspiramos con alivio cada vez que vemos esas simpáticas lengüetas del adhesivo de la batería. Con suerte, no se extinguirán.
-
Un rápido tirón y la batería sale para ser inspeccionada.
It looks like these tabs are supposed to work like those Command things for hanging stuff on the wall - pull it till it stretches and then it comes right off.
You could be super lucky like me, the tabs break off, then try to pry it out with my pocketknife, then a real quick trip out the back door and drop it on the ground because the battery caught fire!
Luckily, once I got the mess cleaned up (the heat was sufficient to dislodge the adhesive by turning it into liquid sticky goo) and the replacement battery installed, it amazingly still worked.
-
-
-
Parece que los rumores eran ciertos—la capacidad de la batería bajó un poco, posiblemente para hacer lugar a las nuevas características como el Motor Táptico y una pantalla ligeramente más gruesa.
-
Esta batería de iPhone tiene aun los mismos problemas de identidad que el año pasado. Parece pensar que viene de Apple del Sur de Asia (Tailandia), Apple Japón, y está hecha en Changsu, China.
-
Sin embargo, Apple dice que la vida de la batería dura 14 horas de conversación 3G y 10 días en espera—igual que en el iPhone 6. Esto es posiblemente debido a silicio más eficiente, por lo que estamos ansiosos de echarle un vistazo...
Why is step 13 in German?
We're rolling out a translation interface for our foreign viewers, but there are still a few bugs we're working out. It should be back to English now. Thanks for the heads up!
Is the physical thickness the same, or are the battery actually thinner then the iPhone 6 battery?
-
-
-
Próxima fuera ¡la mirona de 12 MP del iPhone!
-
La cámara de este año ofrece una mejora considerable del 6, incluso el primer aumento de resolución desde el iPhone 4s.
-
50% más pixeles de foco significa un autofoco más rápido y preciso sin ninguna disminución de la calidad.
-
La nueva cámara iSight también trae el iPhone a la escena de grabación 4K, que ha sido previamente dominada por los teléfonos Android.
-
El aumento de densidad de píxeles a menudo viene a costa de una disminución de la calidad del píxel individual, debido a la interferencia de fotodiodos en competencia, pero esta nueva cámara iSight incluye unas tecnologías geniales que mitigan ese problema.
What is the sensor on the rear facing camera? Is it a Sony sensor again? Thanks!
The Thailand, Japan and US writing on the battery means that it meets certain safety rules for those countries. The funny-looking backwards-R hooked onto a U (or is it a backwards-L?) is an Underwriters Laboratories Recognized Component Mark, meaning the battery won't burn your house down.
-
-
-
Y ahora, una viaje a la Dimensión Desconocida...
-
Encontramos un tornillo de cabeza hexagonal de 2.5 mm en lugar del tornillo más estándar espaciador. Agrega una herramienta nuevo a tu arsenal de teléfono inteligente...
-
Y así sale la unidad de antena lovecraftiana vista en los modelos anteriores.
What is the size of the hex head screw tool needed to take eon the logic board?
yeah no one mentioned that is the new screw that is being used now
where are the liquid damage indicators?
There beside it my friend the white one ,
bjtech -
Hello from iMac teardown
how do i unscrew it?
-
-
-
Y ahora, el momento que todos hemos esperado... es hora de revelar algunos circuitos integrados en la parte frontal de la placa lógica:
-
Apple A9 APL0898+ Samsung 2 GB LPDDR4 RAM (como lo indica las marcas K3RG1G10BM-BGCH)
-
Módem Qualcomm MDM9635M LTE Cat. 6 (vs el MDM9625M en el iPhone 6)
-
Combo de acelerómetro y giroscopio de 6 ejes InvenSense MP67B (también encontrado en iPhone 6)
-
Acelerómetro de 3 ejes Bosch Sensortec 3P7 LA (posiblemente BMA280)
-
Módulo Amplificador de Energía TriQuint TQF6405
-
Módulo Amplificador de Energía Skyworks SKY77812
-
Módulo Amplificador de Energía Avago AFEM-8030
There are 2 GB of Samsung LPDDR4 RAM.
We're fairly certain that the "G1G1" in "K3RG1G10BM-BGCH" indicates a 4 Gb x 4 die, which would be 16 Gb or 2 GB. It's also very similar to the Galaxy S6's "K3RG3G30MM-DGCH", where the "G3G3" is a 6 Gb x 4 die, or 24 Gb (3 GB).
I agree with Geoff. For example, K3RG2G20BM-MGCH is listed as 4 GB, with the key markings being G2G2. G2 standing for 2 GB, for a total of 4 GB.
How did you expose the processor? I thought the cowling was glued on with some kind of thermal paste stuff.
-
-
-
Pero espera, ¡hay más!¡Te damos el doble de chips totalmente gratis!
-
Toshiba THGBX5G7D2KLFXG 16 GB 19 nm NAND Flash
-
Módulo Wi-Fi Universal Scientific Industrial 339S00043
-
Controlador NXO 66V10 NFC (vs 65V10 encontrado en el iPhone 6)
-
CI de Administración de Energía Apple/Dialog 338S00120
-
CI Audio Apple/Cirrus Logic 338S00105
-
CI de Administración de Energía Qualcomm PMD9635
-
Módulo Amplificador de Energía Skyworks SKY77357 (posiblemente una reiteración de SKY77354)
If Bluetooth is in Wifi module, it might be still Broadcom's solution: http://bit.ly/1LR77iZ
Dose the iSight Camera Lens still use sapphire ?
What is the little black IC in the north-west corner of the yellow marked NXP 66V10 NFC Controller in step 19?
Any ideas what the module labeled "Lf 098" below the WLAN/BT module is?
Looking at the iPhone 6S Plus teardown this is a WLAN front end module.
-
-
-
Más Circuitos Integrados en la parte trasera de la placa lógica:
-
Módulo Front-End Murata 240
-
Interruptor de Antena RF Micro Devices RF5150
-
NXP 1610A3 (posiblemente una reiteración de 1610A3 encontrado en el iPhone 5s y 5c)
-
CI de Audio Apple/Cirrus Logic 338S1285 (posiblemente una reiteración del 338S1202 audio codec encontrado en el iPhone 5s)
-
CI de Administración de Energía Texas Instruments 65730AOP
-
Transceptor de Frecuencia de Radio Qualcomm WTR3925
-
Posiblemente un Sensor de Presión Barométrica Bosch (BMP280)
-
-
-
¡Actualización del Desmontaje! Parece que la placa lógica tiene un arma secreta: pequeños sellos que rodean cada uno de los conectores de cable. (Se ven como coberturas negras de espuma alrededor de cada uno de los conectores de oro) ¿Qué puede significar?
-
Respuesta: pensamos que son sellos impermeables de silicio. Parecen que coinciden con una patente registrada de Apple en marzo para conectores impermeables de placa a placa.
-
Esto podría explicar las pruebas recientes que muestran que el 6s y el 6s Plus son radicalmente más resistentes al daño a causa de líquidos.
-
-
-
Hora de sacar las últimas golosinas. Lo primero en caer: el altavoz.
-
Una vista más de cerca al altavoz revela... no mucho, realmente.
-
El altavoz del 6s parece ser un primero muy cercano del altavoz deliPhone 6. Sospechamos que la diferencia en la forma puede ser atribuida a la adición del Motor Táptico.
-
-
-
Y ahora, el famoso "cable para todo" (o mejor conocido como el ensamblaje de cable Lightning), que cuenta con no solo uno, pero dos micrófonos.
-
Además de los dos micrófonos, el ensamblaje de cable de Lightning alberga un despliegue impresionante de componentes:
-
Puerto Lightning para satisfacer tus necesidades de transferencia de datos y carga.
-
Toma de auriculares para tus necesidades de audio.
-
Cable de antena de celular para todos tus necesidades celulares.
-
Si bien el ensamblaje de cable Lightning es un buen ejemplo de eficiencia de ingeniería, no es bueno para las reparaciones. Un solo componente roto significa que el cable completo debe ser reemplazado.
-
-
-
Este desmontaje llega casi a su final: ¡El último paso es el botón de reposo/activación!
-
La gran junta de antaño no está más, pero hay todavía algo de impermeabilidad.
-
Dicho sea al paso, este dispositivo no tiene una calificación de impermeabilidad, y no recomendamos mojar el 6s. El agua y los teléfonos inteligentes no son mejores amigos.
How does the "waterproofing" compare to the iPhone 6 ? It seems like this year, Apple paid less attention to sort of seal the case off.
-
-
-
El iPhone 6s sigue haciendo un buen trabajo, llevándose una calificación de Reparabilidad de 7 sobre 10.
-
El ensamblaje de pantalla continúa siendo el primer componente en salir, lo que simplifica las reparaciones.
-
La batería se puede acceder directamente. Para removerla se requiere un destornillador patentado Pentalobe y conocimiento de la técnica para remover adhesivo, pero no es difícil.
-
El cable Touch ID está todavía fuera del camino, pero está emparejado con la placa lógica, lo que complica las reparaciones.
-
El iPhone 6s todavía utiliza tornillos Pentalobe patentados en la parte exterior, lo que requiere un destornillador especial para removerlos.
Why do pentalobe screws ruin the repairability score, yet you don't mention that you need a special suction cup clamp to pull the screen off? The pentalobe screws shouldn't count against repairability. Sheesh.
I totally agree with this, plus I think that calling them "proprietary" is a bit of a stretch. You can pick up a pentalobe driver fairly cheaply on Amazon, if not your local hardware store.
Chris -
Or even here at iFixit...
imattb -
I agree, they've been using them for a long time and the tools are now readily available. Chances are if you need to get a Philips screwdriver small enough for the job, you can get a Pentalobe screwdriver from the same place.
You also don't need the iSclack, you can just use a regular suction cup; the iSclack was created to help you open the 5s without breaking the tripwire known as the TouchID cable.
booticon -
Enough with iFixit's chronic complaint about pentalope screws. You guys made your point over two years ago (at least). It's what Apple uses period. So just get over it.
These screwdrivers are readily available and anyone who fixes things ought to be use to having to getting specialty tools to do the job. It is no big deal. We get it. You guys don't like them.
The barrier to repair is people going into their phone using the wrong or worn-out tools. Pentalobe isn't a barrier - it's just a signpost saying "you're doing it wrong, get the proper toolkit".
Going to your local hardware store to buy a set of screw drivers is NOT going to lead to a successful repair, even if pentalobe were not part of the equation.
No one should attempt repair of a smartphone without the right precision tools.
Seems to me that the adhesive strips should be marking the score down, not the pentalobe screws. How much more time is that going to add to repairs now that we will have to apply fresh adhesive strips.
+1. Having to source and replace the display adhesive strips complicates repair, and should have deducted a point or two from the score.
isonno -
-
Un agradecimiento especial a estos traductores:
100%
¡ Mariana Roca nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
53 comentarios
No mention of touch screen controller?
is that not it in step 9?
That's 3D touch controller. Where is the capacitive touch controller?
I think touch controller is placed on the rear flex of the screen.
The touch screen socket from the screen has less pins (it's smaller) than iPhone 6, so I believe the incoming signal is already digital and not analog.
If this is true, this is a flashback into the first gen. iPhone era...
crispain -
It's 3D Touch IC. Which is placed back of the screen
aqi -
In step 21 there are 2 antenna cables but by step 22 only one is shown.
where is the longer of the two in the pictures and is it removable from the everything cable?
In step 13, goes along the outer edge of the MLB, should be the Wi-Fi diversity antenna.
Tom Chai -
Hi, in step 19 and 20 I noticed there are two Cirrus Logic Audio IC, does this mean our music will sound a lot better than the iPhone 6?
AMS is not part of iPhone anymore
Bloomberg and the author of the article Bloomberg cites do not know this for sure. The Information is around 2 Corners and uncertain.
Musi8to8 -
Any supercapacitors in there? Specifically, anything by CAP-XX?
I take it, If you ban get Bluetooth in the Wifi module, this may be a great resolution:
Who made the lens and lens unit? Is it largan precision as in the iPhone ? Does the PCB indicate the manufacturer?
What about Lightning port & Headphone jack, do they have any water resistance? Look at video: https://youtu.be/t_HbztTpL08
Does anyone know how to identify the phone if it doesn't powers up and you don't have the sim tray ? It seems there is no IMEI / Serial number on this model.
You can find the IMEI underneath the sim tray, but since you don't have it there's no other way to find it unless you can power up the iphone. As for the serial number it can be found on the sim tray shield/port, basically it's the bright little metal shield between the two EMI shields(one on top, one below it both covered in black). it's right next to one of those QR codes and has the alphanumeric code 17A01 on my iPhone 6s, hope that helps.
The guys at Anandtech said that the 6s has NVMe + TLC flash, replacing the old school eMMC controller and flash. I'm wondering which one is the NVMe controller?
Don't worry, it ain't a discrete NVMe controller or Serdes or any physical boundary of "SSD," but logic that gets integrated into A9 and presented like an NVMe to the OS.
r121 -
Does it have the same rear housing with the iphone 6?
Does anyone know the airgap above and below the Logic board (including all the components on the board)) for iphone 6s?
Does anyone know an estimate of the air gap above and below the logic board in an iphone 6s?
Will you sell the logic board for this model?
GPS location
iPhone6 GPS module actual location inside case. I'm an electrician and want to use GPS longitude/latitude coordinates to drill holes to accurately run wire thru walls.
i need my hole screen fix bc it coming off all the way off and how much is it to get fix
Hi, I have an iPad air 2 device. I see it as an iTunes iPhone (phone detect) device and I can not install ipsw software. what cause trouble?
Excelent....!! Very Good...!!
Hi can these things can repair if broken not iPhone the contractor above the cable
My phone got water damaged. Everything working good excepted for charger. It does show charging but is not charging. I got new battery and motherboard clean with 91% isopropyl alcoho but nothing make it work again. I thinking about the IC but dont know where it at. Could ifixt help me to locate it ?
Thanks
tristar ic procura por esse nome
My iPhone 6S was perfectly healthy and ok until iOSX 11, then the screen went blank and I could do nothing…I took it into Apple and they were able to get it back up, 2 days later I synchronised with my iWatch and it became a brick again. I took it back to Apple, but this time they couldn’t get it working, yet whenever I connect it to iTunes I get the option to Restore or Update. I’ve been through this loop many times now and in each case it fails after 5 to 10 minutes with 4005. I’ve tried various things but nothing will bring it back, since my problem they’re have been 3 updates of iOSX 11, now on 11.3, but I cannot install any of these as my phone is a brick.
Is they’re anything I can do? It was perfect before Apples bug OS release and the face that they’re have been 3 updates released in 3 weeks echo’s this.
Could you help me please - I have a part numbered 160-5Z that i’m not sure where it goes?! I changed the battery and the camera and this part is now displaced and i’m clueless !
Is it possible to completely swap the entire guts of the iPhone 6s with another one that isn’t beat up and dented?
I know that 98% of the parts can be transferred but can’t the entire insides be transferred?
Like how much are each piece
Was capable of removing the front screen with a suction cup thing
Thank You for sharing the good write-up. I certainly love this I Phone 6. Thanks! https://www.toolsvilla.com/
Is there another iphone rear lcd flash that will fit an iPhone 6???