Saltar al contenido principal

Qué necesitas

Resumen del Video

Este desmontaje no es una guía de reparación. Para reparar tu iPhone XR, utiliza nuestros manuales de servicio .

  1. Desmontaje  del iPhone XR, Desmontaje  del iPhone XR: paso 1, imagen 1 de 1
    • El iPhone XR puede verse un poco diferente en el exterior, pero las especificaciones parecen bastante familiares:

    • A12 Bionic SoC de ocho núcelos con un motor neuronal de última generación

    • Pantalla LCD Liquid Retina de 6.1 "con resolución de 1792 x 828 a 326 ppi, True Tone y compatibilidad con la amplia gama de colores (P3)

    • Cámara trasera de 12 MP con apertura ƒ / 1.8 con OIS y cámara selfie de 7 MP emparejada con hardware TrueDepth FaceID

    • 64 GB de almacenamiento interno (128 GB y 256 GB de configuraciones opcionales)

    • Soporte de banda celular amplia con capacidad eSIM y Wi-Fi 802.11a /b/g/n/ ac con MIMO + Bluetooth 5.0 + NFC

    • Clasificación IP67 de resistencia al polvo y al agua

  2. Desmontaje  del iPhone XR: paso 2, imagen 1 de 3 Desmontaje  del iPhone XR: paso 2, imagen 2 de 3 Desmontaje  del iPhone XR: paso 2, imagen 3 de 3
    • Había un montón de colores para elegir, pero tenemos una afinidad por el azul y el negro.

    • Los colores no importan mucho cuando puedes ver todo. Nuestros amigos de Creative Electron nos dieron un vistazo en el interior de este iPhone nuevo con algunos rayos XR.

  3. Desmontaje  del iPhone XR: paso 3, imagen 1 de 3 Desmontaje  del iPhone XR: paso 3, imagen 2 de 3 Desmontaje  del iPhone XR: paso 3, imagen 3 de 3
    • Tratando de despertar un poco de rivalidad entre hermanos, comparamos el XR y el XS y vemos qué diferencias podemos detectar.

    • Comenzamos nuestra búsqueda en el borde inferior, donde la banda de antena faltante del XR y las bonitas rejillas simétricas nos recuerdan más al X del año pasado.

    • El XR heredó muchos de los mismos rasgos que sus hermanos XS, pero no heredó las capacidades degigabit-LTE.

    • Al encender las pantallas, es fácil ver que los biseles de la XR son un poco más grandes y, si te acercas realmente, las curvas comienzan a aparecer un poco ásperas en los bordes.

    • El XR heredó muchas características del XS, pero solo consiguió una cámara: la gran angular, mientras que el teleobjetivo permanece con el XS.

  4. Desmontaje  del iPhone XR: paso 4, imagen 1 de 3 Desmontaje  del iPhone XR: paso 4, imagen 2 de 3 Desmontaje  del iPhone XR: paso 4, imagen 3 de 3
    • Las similitudes con el XS continúan con el procedimiento de apertura: los tornillos pentalobe rodean el puerto de carga, que no está más bastante centrado, y la apertura solo requiere un poco de ayuda de un iOpener.

    • Las diferencias incluyen: tornillos pentalobe sorprendentemente no coincidentes con el color, y una ranura SIM que se deslizó hacia la parte inferior del teléfono.

    • Una diferencia que parece que no podemos precisar es que el XS obtuvo su punto de IP adicional: ¡abrir el XR se siente casi igual que el XS!

  5. Desmontaje  del iPhone XR: paso 5, imagen 1 de 3 Desmontaje  del iPhone XR: paso 5, imagen 2 de 3 Desmontaje  del iPhone XR: paso 5, imagen 3 de 3
    • El procedimiento minucioso de apertura de la pantalla se acaba así, casi sin dolor como en un teléfono inteligente resistente al agua.

    • Apple perfeccionó este diseño en el iPhone 5 y, afortunadamente, nunca lo ha cambiado.

    • En el interior, el XR comienza a parecerse más a un híbrido divertido entre el 8 y el X. Volvemos a una batería rectangular, pero también hay una placa lógica rectangular.

    • La pregunta es: ¿Cuántas capas tiene esa placa lógica?

  6. Desmontaje  del iPhone XR: paso 6, imagen 1 de 3 Desmontaje  del iPhone XR: paso 6, imagen 2 de 3 Desmontaje  del iPhone XR: paso 6, imagen 3 de 3
    • En el camino para liberar la placa lógica, nos encontramos con una gran cantidad de tornillos separadores. Estamos acostumbrados a uno o dos por iPhone, no diez (x).

    • Por suerte, estamos armados y listos.

    • ¿Qué es esto? Un lector de tarjetas SIM modular! Eso es un iPhone primero.

    • ¡Esto no solo significa un intercambio rápido de un lector SIM muerto, sino que también reduce el costo de reemplazar su placa lógica!¡Todos ganan!

    • Esto es probablemente una concesión al mercado chino, donde eSIM no está soportado, por lo que para permitir la funcionalidad dual-sim en los modelos chinos, Apple instala un lector dual de Nano-SIM. El enfoque modular lo hace mucho más fácil de lo que sería si el lector estuviera soldado a la placa principal, como en modelos anteriores.

    • ¡La placa lógica esbelta, sin codos y de un solo piso ahora es libre de escapar!

    With a modular Sim Reader, could it be we can swap the EU one for the Chinese sim reader and leverage true dual-sim? That would be excellent!

    Hugo Catarino - Contestar

    I agree reason of modularity should be there. But I suppose is more an issue of industrialize with efficiency. Sound difficult that it would work on the ESim board ..? 3 Sim sound too much …. but is some to investigate. it may happen they put ESim hardware all over and that dual physical sims may come out swapping the modules… Thinking they have done it because sharing an advantage with users I doubt about. Is since 3 years that more and more components in the Apple lineup are soldered and not changeable and its obvious that a relevant part of their stellar margins came from an accurately strategy that consider ram sizes… or hd in the Mac arena…

    Andrea Marco Borsetti - Contestar

    Look at the CPU heat spreader, it is much thicker than previous models, is it possible that this is some kind of mini flat heat pipe?

    Tom Chai - Contestar

  7. Desmontaje  del iPhone XR: paso 7, imagen 1 de 2 Desmontaje  del iPhone XR: paso 7, imagen 2 de 2
    • Con la placa madre fuera, tenemos nuestro primer vistazo al silicio incorporado:

    • Apple APL1W81 A12 Bionic SoC, en capas sobre Micron MT53D384M64D4SB-046 XT:E 3 GB LPDDR4x SDRAM

    • Apple / USI 339S00580 (probablemente un módulo WiFi / Bluetooth, similar a lo que se encuentra en el XS)

    • Controlador NXP Semiconductor SN100V NFC

    • 3 amplificadores de audio Apple/Cirrus Logic 338S00411

    • Skyworks 203-15 G67407 1838 (probablemente un módulo de amplificación de potencia)

    • Controlador de puerto USB tipo C CYPD2104 de Infineon (antes Cypress Semiconductor)

    • Módulo frontal Qorvo QM76018 RF

    The “76018 119G1“ module is the Qorvo PAD.

    yazhou_wang - Contestar

    What is the battery Apple I phone Xr

    Hitesh - Contestar

  8. Desmontaje  del iPhone XR: paso 8, imagen 1 de 2 Desmontaje  del iPhone XR: paso 8, imagen 2 de 2
    • Más chips la parte posterior de la placa lógica. Muéstranos tu identificación, por favor ...

    • Toshiba TSB3243VC0428CHNA1 64 GB de almacenamiento flash

    • Intel PMB9955 (probablemente el procesador de banda base XMM7560 LTE Advanced Pro 4G LTE), transceptor RF PMB5762 y PMB5829

    • Circuitos integrados de administración de energía Apple 338S00383-A0, 338S00375-A1 (posiblemente de Dialog Systems)

    • IC (Circuito de carga) de batería de Texas Instruments SN2600B1

    • Códec de audio Apple/Cirrus Logic 338S00248

    • Módulo frontal Skyworks SKY13768

    • Broadcom BCM59355A2IUB4G (probablemente una variación del chip receptor de energía inalámbrica BCM59350)

    I still don’t get why the speed difference in the Xr vs the Xs. If they have the same chip, shouldn’t max download speeds be the same?

    jridder - Contestar

    Xs has 4 antennas, while the XR only has 2.

    Tom Chai -

  9. Desmontaje  del iPhone XR: paso 9, imagen 1 de 2 Desmontaje  del iPhone XR: paso 9, imagen 2 de 2
    • Identificación IC, parte 2.

    • Texas Instruments LM3539 controlador de luz de fondo de pantalla

    • Insertar traducción aquí

    • Insertar traducción aquí

    • Insertar traducción aquí

    • Insertar traducción aquí

    • Insertar traducción aquí

    • Insertar traducción aquí

  10. Desmontaje  del iPhone XR: paso 10, imagen 1 de 3 Desmontaje  del iPhone XR: paso 10, imagen 2 de 3 Desmontaje  del iPhone XR: paso 10, imagen 3 de 3
    • Moviéndonos desde la placa madre, aquí hay dos placas más.

    • La nueva tarjeta XR + lector SIM (centro) se parece un poco a una placa iPhone X desplegada (derecha). La amplia placa del iPhone 8 Plus se muestra a la izquierda para comparar.

    • Este nuevo factor de forma prácticamente completa la brecha en la evolución de las placas base de iPhone

    • Un primer plano vía rayos X nos recuerda que esta placa madre de iPhone "simplificada" aún es enormemente compleja.

    • Se esconde aún más silicio debajo de otros componentes, como el sistema de cámara TrueDepth.

  11. Desmontaje  del iPhone XR: paso 11, imagen 1 de 2 Desmontaje  del iPhone XR: paso 11, imagen 2 de 2
    • Con la placa lógica fuera del camino, ¡sacamos el famoso motor Taptic!

    • Aunque el XR no es compatible con 3D Touch, recibe Toque Háptico, que es básicamente un toque largo en lugar de un toque fuerte. Parece que los hápticos son impulsados por un familiar motor de vibración de oscilación lineal.

    • ¡Lo que sigue es esa batería rectangular! Estamos más que felices de encontrar cuatro pestañas adhesivas enteras que hacen que la remoción sea bastante ventosa.

  12. Desmontaje  del iPhone XR: paso 12, imagen 1 de 3 Desmontaje  del iPhone XR: paso 12, imagen 2 de 3 Desmontaje  del iPhone XR: paso 12, imagen 3 de 3
    • ¡Las cuatro pestañas tienen un rendimiento admirable y la batería de 11.16 Wh se retira sin problemas!

    • Ya hemos escuchado que el XR tiene la mejor duración de batería del iPhone hasta ahora, pero ¿cómo se acumula? ¡Hora de un desfile de baterías!

    • De izquierda a derecha, tenemos:iPhone 8 (6.96 Wh), iPhone XR (que está #ganando), iPhone 8 Plus (10.28 Wh) y iPhone XS (10.13 Wh).

    • La batería XR parece un poco pequeña en comparación con la del 8 Plus, pero estas apariencias engañan. La batería XR es más gruesa y contiene más jugo, no menos.

    • Si estás buscando una comparación de manzanas con naranjas, Android aún está ganando el juego de capacidad pura. El Galaxy S9 + sigue siendo campeón con 13.48 Wh, y el Pixel 3 XL sigue de cerca con 13.2 Wh.

    • Mientras estamos comparando, aprovechemos la oportunidad para realizar una X-amina de algunos rayos X de la serie X. De izquierda a derecha, tenemos el iPhone X, el XR (con su marco de aluminio menos denso) y el XS Max.

    Why is the iPhone X’s induction coil wire so much thicker than the others? Was that a change from the 8/X to XR/XS generations?

    Jacob Ford - Contestar

    @unitof Correct—Apple redesigned their charge coils for this year’s models. Word is they are using copper coils (as seen in the steps below) rather than ferrite polymer composite (FPC). Good eye!

    Jeff Suovanen -

  13. Desmontaje  del iPhone XR: paso 13, imagen 1 de 3 Desmontaje  del iPhone XR: paso 13, imagen 2 de 3 Desmontaje  del iPhone XR: paso 13, imagen 3 de 3
    • Aquí está la única cámara trasera, el mismo módulo de gran angular recién actualizado de XS y XS Max.

    • El XR de un solo sensor parece ser un competidor lógico para el Pixel 3 equipado de manera similar con Google, pero el teléfono de Google de alguna manera se las arregla para hacer que incluso la XS Max de doble cámara salga del agua. ¿Solución? Más cámaras, tal vez.

    • Alineamos la cámara junto con el sistema TrueDepth que alimenta a FaceID, que, por lo que sabemos, se ve prácticamente sin cambios desde la primera vez que lo vimos en el iPhone X.

    • Para no quedarse atrás, el altavoz inferior es el siguiente: aún así es bastante fácil de extraer, lo cual es bueno, porque probablemente querrás dejarlo de lado para reemplazar la batería.

  14. Desmontaje  del iPhone XR: paso 14, imagen 1 de 3 Desmontaje  del iPhone XR: paso 14, imagen 2 de 3 Desmontaje  del iPhone XR: paso 14, imagen 3 de 3
    • A continuación, dirigimos nuestra atención a la tan discutida pantalla de Retina líquida de Apple.

    • La pantalla LCD de la XR es 0.3" más grande que la AMOLED de la XS, pero también es más gruesa y más pesada, como se espera de una pantalla LCD.

    • La necesidad de una retroiluminación significa que un ensamblaje de pantalla LCD siempre necesitará un factor de forma ligeramente mayor que un ensamblaje AMOLED equivalente.

    • Por lo que podemos decir, este conjunto de pantalla más grueso es lo que ha empujado el conector Lightning fuera del eje.

    • Volviendo al caso, desenterramos la bobina de carga inalámbrica para verla más de cerca.

    • ¡Hemos golpeado el cobre! La menor resistencia del cobre (en comparación con el FPC en la X) debería significar una carga más rápida con menos calor.

    FPC also uses copper. It looks like there is just more of it now in the wire, which is reducing the resistance.

    JohnnyNoy - Contestar

    Is the touch panel separate or incell?

    Nathan Chen - Contestar

    i didn’t notice the lightning connector being off axis. %#*@ it, now i can’t unsee it. that is going to bug me all day.

    Lewis Marx - Contestar

  15. Desmontaje  del iPhone XR: paso 15, imagen 1 de 1
    • Con el XR completamente excavado, mostramos los resultados de nuestra excavación:

    • Un vistazo bajo el capó reveló características distintivas del diseño que recuerdan tanto al iPhone 8 (batería rectangular, placa de una capa) como a X (placa lógica cuadrada ID de cara), lo que lo convierte en el "iPhone 9" espiritual.

    • Pero el XR no es todo retroceso, tiene el último silicio y contiene características completamente nuevas para iPhones. Encontramos el primer lector modular SIM de Apple, posiblemente para ayudarlo con sus nuevos planes multi-SIM.

    • Gracias de nuevo a nuestros buenos amigos en Creative Electron. Ahora te dejamos con un chiste muy bueno:

    • ¿Cuál es el iPhone favorito de un pirata?

    • El X-ARRRrrrrr

    I’m curious about the QI Receiver, its dimensions and location on the iPhone (Xr) housing. Could you help? Its for me to properly locate that “steel washer” for magnetic car holder. Thanks! :)

    PA N. - Contestar

    Muy bueno el chiste, favorito desde ahora de mi hijo de 7 años. =)

    Sergio Murillo Rosas - Contestar

  16. Consideraciones Finales
    • El primer procedimiento de apertura de la pantalla y el fácil acceso a la batería siguen siendo prioridades de diseño:
    • Una pantalla rota se puede reemplazar con una extracción mínima de hardware y, con un poco de cuidado, puede conservar el Face ID.
    • Apple vuelve a usar pequeños tornillos poco comunes pentalobe y de tres puntos para bloquear la reparación, pero estos son preferibles a los pegamentos fuertes.
    • Las medidas de impermeabilización complican algunas reparaciones, pero hacen que las reparaciones de daños por agua difíciles sean menos probables.
    • El vidrio en la parte delantera y trasera duplica la agrietamiento, y el vidrio trasero roto requiere un reemplazo completo del chasis.
    Calificación de Reparabilidad
    6
    Reparabilidad 6 de 10
    (10 es lo más fácil de reparar)

Un agradecimiento especial a estos traductores:

en es

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Taylor Dixon

Miembro Desde 06/26/18

67,089 Reputación

94 Guías creadas

43 comentarios

It’s here! Can’t wait to see what magic they did on the display.

Sandy34 - Contestar

Next year: iPhone XR GTS SS Z11 LX

Juan Martinez - Contestar

iPhone XR GTS SS Z11 LX Turbo Limited Luxury 2.0 Edge

Robert G -

where is the repairability score?

Ali Dhia - Contestar

Battery size is smaller than in 8plus but capacity is bigger.. hmmm

dozerator - Contestar

I think it’s thicker

Haotian Zhang -

It’s stated that it’s thicker. There are more than 2 dimensions.

David Berk -

Because Xr’s battery is thicker

drbranco -

Hi I’m wondering how much difference is there between the Taptic Engine’s iPhone Xs and Xʀ have?

Houston Duane - Contestar

Hey Houston, the XR and XR Taptic engines look nearly identical size-wise, but have different screw patterns!

Sam Goldheart -

I heard rumor says iPhone XR has a Force Touch coil around the screen like the ones on Apple Watch. Can you do a screen teardown and find out if it’s true?

fieldont - Contestar

How much does the wireless charging coil weigh?

wenhuf - Contestar

Are there any Himax Technology parts in this phone?

jritchie2004 - Contestar

Could you please purchase and disassemble the CHINESE version? It should have a PHYSICAL DUAL SIM SLOT, therefore I expect some differences in the internal hardware! Thank you

Max70 - Contestar

would like an update on the Qorvo PAD/ will it only be in the Chinese version ??? Hopefully someone has an explanation of why it was not found in the teardown.

ski3938 - Contestar

I was in the Higuera Apple Store when Kiki bought this phone! She bought a coral one too.

Anthony Bonvino - Contestar

Who’s Kiki lol?

Rafael B -

Did I miss the Teardowns wallpaper?

Pete Karnowski - Contestar

I wonder if you can switch out the sim slot with the dual sim slot of the Chinese version and get a real dual sim upgrade.

Ryo Saeba - Contestar

That would be really cool!

Suchiththa Wickremesooriya -

indeed. Is the ST33G1M2 e-sim chip in the sim-reader module or in the motherboard?

If we could replace the sim-reader for true dual-sim it would be excellent!

Hugo Catarino -

Yes a proper dual sim would really reduce the aggro from providers. One thing has always bothered me about these glued shut phones: What happens to the waterproofing once you have opened one using an iopener or similar soource of heat? When reassembled, will they still be waterproof? (almost certainly not?)Could you remove the old sealant and rewaterproof it properly? What would you use?

I. Margaronis - Contestar

Actually, the “juice” in the battery means very little to the user. What user cares more are:

1. Can I leave home without a charger, and without hoping for a charger until I come back?

2. What performance can I expect with such battery? (in simple words - Can I run latest 3d jaw-dropping 120fps game on the device without draining it in half an hour? Will I survive a 3 hour drive with navigation software running, without a charging cable?)

3. How much do I pay for this battery, in weight? After all - anyone can stick an accessory battery and have their iPhone work for 2-3 days. Only it’s… well… heavy!

So the battery parade isn’t very helpful - and as far as my own experience taught me - Androids with huge battery, still drain twice as fast as my old iPhone SE - while presenting mediocre, never-awe-inspiring performance.

I wish someone would come up with a GOOD benchmark on power and up-time on those iPhones.

Yes, I’m an iOS software developer - I KNOW apps can kill battery and Apple can’t prevent this completely.

Motti Shneor - Contestar

It is true that battery capacity is only one of many influencers of how long a phone will last.

Here’s an article that compares how long phones last browsing the web before they die.

Arthur Shi -

It’s much better that it’s iPhone 8 siblings….

I mean, once you got all the screwdrivers you need, all you have to worry about is the way to pull off that display.

Lightning connector IS still modular. Unlike the other *cough* iPad *cough* lineup.

Xavier Jiang - Contestar

Can i just say, i love your teardown and everything, but its been 8 years now that Apples been using pentalobe screws, and i think that the pentalobe driver has become quite common (most repair kits you buy, either from iFixit or for $2 off of amazon have a pentalobe driver), so i don’t think it merits being in the “neutral” section of the repairability criteria…

Andrew Demetriou - Contestar

Hey, Andrew, thanks for reading and commenting! Glad you enjoy the teardowns! I agree that pentalobe and tri-point drivers are more widely available now than they were eight years ago, but pentalobe and tri-point screws still aren’t used anywhere besides Apple devices. That means that even someone who’s equipped to take apart all other electronics has to order special drivers to work on Apple products, and we view that as a move toward keeping people out of their devices.

Adam O'Camb -

where the iPad Pros at?

Suchir Kavi - Contestar

It would be nice to see more details of the how the LCD screen is connected to enable the symmetrical bezel, and how it differs from the curved OLED bottom of the X series screens.

Pete Wilson - Contestar

Can you purchase a chassis and replace it? If so how much I dont feel like paying $400 to replace the whole phone

Xanny - Contestar

Can you make a list of all materials and show if you can put it back together

王子良 - Contestar

Where is the GPS antenna and where is the cellular antenna?

Abdullah - Contestar

What about the shield on the back of the screen that is welded down is that need to swap the screen?

Noah Vernon - Contestar

Big question that NO ONE ever mentions, How about the back CAMERA glass on the XR??? The small piece of glass over the lens of the camera? I see the part for sale for only $7 and by the looks and feel of it, its a separate piece!

Mickey Sheehan - Contestar

Does anyone knows where is the logic board’s serial number?

Hernán Insaurralde - Contestar

Anyone ever facing a problem with eSIM module?

Aiman. Mohd Nor - Contestar

This is a horrible teardown, I love this website and have used it for close to 7 years. Most teardown’s on here are great and give all the details on parts and screws but this one is stupid. This phone has been out for over a year, can we get a more detailed teardown please. I am sorry if I am being a jerk in this comment.

jon mask - Contestar

I’m sorry this one wasn’t up to par for you Jon! :( Could you elaborate on what you mean by more detailed? What specific things would you like to see in this (and other) teardown(s)? We’ve been doing our best to keep teardowns fun and exciting while phones are getting more and more similar, but we definitely have skipped over some important things from time to time in our attempt to avoid rehashing details. I’d love to hear your thoughts, thanks for loving our website and being a follower for so long!

Taylor Dixon -

Where is the NFC antenna please? After a frame replacement, the induction charge works but not Apple Pay, any idea ? Thanks

Adrien Durand - Contestar

This is a short version of tear-down and now I am stuck!

JoeBlog - Contestar

They put the long ones on YouTube … I guess to get Remuneration $$$ - OK, I understand.

https://www.youtube.com/watch?v=7YAn1nJL...

JoeBlog -

what about bottom? where is plug for charger ?

Darius Varanavičius - Contestar

Hi, is it possible to buy from iFixit replace microphone for iPhone XR please? I am in Denmark and which other's products for finish correct replace the port microphone I need also?

Mihai Mihaescu - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 84

Ultimos 7 días: 513

Ultimos 30 días: 2,203

Todo El Tiempo: 540,606