Repara tus cosas Comunidad Tienda

Desktop PC Left Panel Replacement

Introducción

Removing the left panel of a desktop computer is an important skill to have for repair and troubleshooting purposes. The left panel must be removed before any repairs can be performed on the inside of the computer. In addition, computers with heating problems could benefit from having the left panel removed.

Qué necesitas

  1. Desktop PC Left Panel Replacement, Left Panel: paso 1, imagen 1 de 1

    • Unplug the computer from the power supply before any maintenance or disassembly.

    • Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.

    • These screws can usually be removed by hand.

    • Be sure to wear an anti-static bracelet or use an anti-static mat to ensure important components are not damaged by static electricity.

    Editar

    This depends on the model of system. Some systems have a lever/latch to pull to release the cover. Many Dell and HP models use latches to open the covers (no tools required to open the system). Some systems need a screwdriver to remove the screws. Some are Phillips screws, others may be Torx.

    Dave Ellefson - Contestar

    This is correct.

    DistroHopper39B -

  3. Desktop PC Left Panel Replacement: paso 2, imagen 1 de 2 Desktop PC Left Panel Replacement: paso 2, imagen 2 de 2

    • Next, remove the side panel of the computer case to allow access into the computer. Slide the panel towards the back of the computer and lift it up to remove.

    • If there is a fan mounted on the side panel, make sure to unplug the cable before fully removing the panel.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

23 personas más completaron esta guía.

Autor

con 11 otros colaboradores

David Lennon

Miembro Desde 04/14/15

9,944 Reputación

10 Guías creadas

Insignias: 23

+ 20 más insignias

Equipo

Cal Poly, Team 4-5, Maness Spring 2015 Miembro de Cal Poly, Team 4-5, Maness Spring 2015

CPSU-MANESS-S15S4G5

4 Miembros

45 Guías creadas

3 comentarios

What is the name of the case used in this tutorial?

Nicolas Hunter - Contestar

I would also like to know, I saved one of these from a junk pile but not sure what it is? Was able to fit a full ATX board with gtx570 and a little breathing room so not too shabby for how small it is.

Wabbajack Wabbajack - Contestar

I have this same case in black and want to know what model it is.

numanair - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 15

Ultimos 30 días: 65

Todo El Tiempo: 5,332