Saltar al contenido principal

Resumen del Video

Introducción

Esta es un tutorial sobre cómo desensamblar el Samsung Galaxy S6.

Este desmontaje no es una guía de reparación. Para reparar tu Samsung Galaxy S6, utiliza nuestros manuales de servicio .

  1. Apague el Samsung Galaxy S6.
    • Apague el Samsung Galaxy S6.

    • Utilice un pasador de expulsión o pinzas puntiagudas para extraer la bandeja de la tarjeta SIM.

  2. Calentar la cubierta de la batería del Samsung Galaxy S6.
    • Calentar la cubierta de la batería del Samsung Galaxy S6.

    • Colocar un chupón o ventosa en los bordes de la cubierta del equipo para hacer presión al despegar la cubierta. (Aviso: La cubierta de la batería se adhiere a la carcasa trasera con adhesivo muy fuerte, tómese su tiempo durante este proceso.)

    • Separar la cubierta de la batería con una pajuela o una pinza.

  3. Afloje los 13 tornillos de la carcasa trasera. Caliente el conjunto LCD.
    • Afloje los 13 tornillos de la carcasa trasera.

    • Caliente el conjunto LCD.

    • Separar la carcasa trasera de la pantalla LCD con la ayuda de un chupón o ventosa y la pajuela o pinza plástica. (Aviso: tenga cuidado de no dañar el chip de carga inalámbrico conectado a la batería.)

    It’s often a PIN on your bootup screen unlock security will face a brand new SIM card with the owner of a brand new handset. Packaging materials http://dailycome.com/how-to-change-or-di...

    peetersuns - Contestar

  4. Retire el flex del botón de encendido. Retire el flex del botón de volumen. Retire los botones plásticos laterales. (Aviso: el botón de encendido y los botones de volumen del Galaxy S6 son iguales.)
    • Retire el flex del botón de encendido.

    • Retire el flex del botón de volumen.

    • Retire los botones plásticos laterales. (Aviso: el botón de encendido y los botones de volumen del Galaxy S6 son iguales.)

    Excellent! !

    I’m attempting to replace the battery but the rear cover is not releasing. I’ve heated the back repeatedly but the glue is holding. Not sure how much heat can be used?

    Any suggestions?

    Thank you.

    Charles

    Charles Speake - Contestar

    Slowly heat the back glass Edge more than 1 minutes, the adhesive is on the Edge of the phone. May this help you.

    Mandy - Contestar

  5. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  6. Levante las cintas flexibles del chip de carga en ambos lados de la carcasa trasera. (Aviso: tenga cuidado de no dañar las cintas flexibles.)
    • Levante las cintas flexibles del chip de carga en ambos lados de la carcasa trasera. (Aviso: tenga cuidado de no dañar las cintas flexibles.)

  7. Levante el conector del panel LCD, el conector frontal de la cámara, el conector de la batería, el conector del auricular y el conector de la cinta flexible del botón de inicio.
    • Levante el conector del panel LCD, el conector frontal de la cámara, el conector de la batería, el conector del auricular y el conector de la cinta flexible del botón de inicio.

    • una vez retirados todos los conectores procederemos a extraer la placa base.

    I am more curious about the main board. Is there any in-depth description of component in main board?

    nelsonduann - Contestar

  8. Levante suavemente la batería con una pinza.
    • Levante suavemente la batería con una pinza.

  9. Retire la cámara frontal. (Aviso: tenga cuidado de no romper la cinta flexible.) Retire el motor vibrando.
    • Retire la cámara frontal.

    • (Aviso: tenga cuidado de no romper la cinta flexible.)

    • Retire el motor vibrando.

  10. Retire la cámara principal de la placa base. Retire el cable Bluetooth y el cable de señal Wifi.
    • Retire la cámara principal de la placa base.

    • Retire el cable Bluetooth y el cable de señal Wifi.

  11. Retire el tornillo del conector del auricular. (Nota: el tornillo es diferente que los tornillos de la carcasa trasera.) Caliente la mica LCD para liberar la carcasa frontal. Levante la mica con la ayuda de una pajuela o pinza plástica.
    • Retire el tornillo del conector del auricular. (Nota: el tornillo es diferente que los tornillos de la carcasa trasera.)

    • Caliente la mica LCD para liberar la carcasa frontal.

    • Levante la mica con la ayuda de una pajuela o pinza plástica.

  12. Levante el conector en la parte posterior del botón de inicio.
    • Levante el conector en la parte posterior del botón de inicio.

    • Levante el botón de inicio.

  13. El proceso de desmontaje del Samsung Galaxy S6 está completo.
    • El proceso de desmontaje del Samsung Galaxy S6 está completo.

    This, looks intense.

    Julio Velez - Contestar

    It looked quite easy to me. BTW i don't think there was any glue on the front. It looks like it is built like say the galaxy s2 with the front lcd assembly snapped in to the back. Meaning calling it a mid frame is not all that accurate. The mid frame would be the bezel of a s3 s4 etc. Where as on this you have back/battery cover and the outer back glass. Which seems to basically be only edged glued. I know what they did to break the glass on the front. They tried to pull it apart s5 style not thinking there was screws holding it in can we say a oh crap moment :p

    Nova Flare - Contestar

Un agradecimiento especial a estos traductores:

85%

¡ Charlie Jauregui nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Mandy

Miembro Desde 05/12/14

8,693 Reputación

9 Guías creadas

Thanks man i was curious what's inside that puppy... Not an easy repair like my galaxy s3....

Tear down s6 edge please

Mateusz Bonkowski - Contestar

I'm curious, what is the DAC on this phone? I know Cirrus Logic partnered with Wolfson so it could be interesting to find out.

Mike Vercimak - Contestar

The original author of this guide is ETrade Supply (as noted by the video itself). The video, images, and writeup were all produced and watermarked by them, though the image watermarks have since been removed via liberal cropping.

For the full and un-doctored photo set, please see:

http://www.etradesupply.com/blog/how-to-...

Chris Gilliam - Contestar

Which image sensor did Samsung use for GS6? Is it SONY?

Will - Contestar

Where is the memory located? And is it possible to upgrade it?

chris - Contestar

Thanks for your great tutorial. I have a question though, if let says i wanted to replace broken piece (e.g. The motherboard or battery) where is the best place or website to go to.? I reside in perth, australia, so hoping if its overseas i still can get them posted here.

Thanks

N0MaD - Contestar

I just broke the glass on the back camera. Looks like it is part of the back cover case. What part would i need to order to replace it?

Tony - Contestar

I just broke the glass on the back camera. It is the glass on the back cover. What part do I need to replace that and where can I order it?

Tony - Contestar

I am trying to locate the JTAG connections - any ideas? Thanks!

Will Jongenelen - Contestar

Can the SIM card reader slot be removed from the logic board? Cuz my Galaxy 6 it's not reading my SIM card, thank you for the video

juarezdonan - Contestar

My Galaxy s6 edge its was wet just on the mother board .

You think guys can I fix it and how thank you please let me know

Fernando - Contestar

My Galaxy S6 Edge its was Wet On the top only 1/4 device can you guys help me to fix

Fernando - Contestar

Hello! on the back at middle frame. without NFC ribbon are 3 more ribbons one top left side...right side one...and bottom left side one.. its says ZF-E4 on them. What are them FOR? it's a problme if a broke one?

99Spyder99 - Contestar

And i have a problem. Please help me...i changed the display on my galaxy s6...everything works ok..but when i assembly on the middle frame...and i charge..it's says it's charging but not charge..the battery ramins the same.? do you know what is the problem?

99Spyder99 - Contestar

My phone fell face down, it has a protective screen on it, however, the impact from the fall knocked it out. It has a previous crack on the left bottom side. But since the fall, the screen went out. I can see it light up, it rings and all, but the screen is black. Is this something that I can repair myself?

Thanks

Wanda Wanda - Contestar

Thanks for the video. I dropped S6 in the water sink and now battery gets hot very fast when I turn on. But I will NEVER going to buy another Samsung products again.

patricksingr - Contestar

You dropped it in water and you blame the product . wow is all i can say

David -

Does anyone know what the little things on the inside of the housing along the edges do?

kyle - Contestar

¡Excelente aporte muy bien realizado!

David Molina - Contestar

Excellent! I may attempt to fix my GS6 now. After the Nougat OTA, my GS6 went black, would boot loop, go dead or not charge and was useless. I tried cache wipe, total reset, etc. but nothing worked. I discovered that if the phone were twisted slightly, that it would operate properly. Attached (twisted) to a board, it has been powered up now for eight hours and is still working perfectly with NO MALFUNCTIONS and is on the latest OS, Nougat 7.0 It has a poor connection internally!

Mr Horsepower - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 5

Últimos 7 Días: 29

Últimos 30 Días: 139

Todo El Tiempo: 137,113