Dell Vostro 3500 CMOS Battery Replacement

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

Note that disconnecting the so-called CMOS battery does not reset the BIOS settings or clear a BIOS password. In fact its only purpose is to maintain the real time clock when no other power source is available.

The CMOS battery should last for around 10 years. If the computer forgets the date and time when you remove both the mains adapter and the main battery then you need to replace the CMOS battery.

Qué necesitas

Paso 1 Sliding the Battery Latch

Dell Vostro 3500 CMOS Battery Replacement, Sliding the Battery Latch: paso 1, imagen 1 de 1

Flip the computer over.
Slide the battery release latch to the unlock position.

Traducir

Paso 2 Sliding the Battery Release Latch

Dell Vostro 3500 CMOS Battery Replacement, Sliding the Battery Release Latch: paso 2, imagen 1 de 1

Slide the other battery release latch to the unlock position.

Traducir

Paso 3 Removing the Battery

Dell Vostro 3500 CMOS Battery Replacement, Removing the Battery: paso 3, imagen 1 de 1

Slide the battery and remove it from the computer.

Traducir

Paso 4 Remove the Screws

Dell Vostro 3500 CMOS Battery Replacement, Remove the Screws: paso 4, imagen 1 de 1

Turn the laptop over and remove two screws securing the service cover.

Traducir

Paso 5 Removing the Base Cover

Dell Vostro 3500 CMOS Battery Replacement, Removing the Base Cover: paso 5, imagen 1 de 1

Prise up the service cover and remove it from the computer. Clips along the edges can be snapped open except for those on the left hand edge (as shown in the photo) which have to be disengaged after all the others by romoving the cover in the direction shown.
On resassembly, insert the clips on the left hand edge then snap all te others home by applying firm pressure along the other edges of the cover.

Traducir

Paso 6 CMOS battery removal

Dell Vostro 3500 CMOS Battery Replacement, CMOS battery removal: paso 6, imagen 1 de 1

Locate the CMOS battery
Gently disengage its connector.
Do not disengage the connector by pulling the leads as you may tear them out of the connector. Instead, pull on the connector itself, ideally with a pair of tweezers, rocking it back and forth alternately in the directions of the red and black leads.